Complete Line CNC Oscillating Knife Cutting Machine
Apple Shopping Event
Hurry and get discounts up to 20% Read more
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm, Auto-Feeding Table — specified for flexible material cutting across fabric, leather, foam composite, PVC and rubber production.
- Swiss imported oscillating knife with full-cut and half-cut modes, matched to your material type before shipment
- Yaskawa servo, Hiwin linear guide, 7.5kW vacuum hold-down and HP-GL compatible control for integration with existing nesting workflows
- Cutting speed 200–800 mm/s, repeated accuracy ≤0.1 mm
Sample cutting on your own material is completed before commitment, with tool head configuration and edge quality verified against your actual production thickness.
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Configured Per Material Profile — This RT-D2516/RT-S2516 CNC oscillating knife cutting machine ships only after the buyer’s specific flexible material is tested on the factory floor, locking in tool head mode and vacuum zoning before the order is confirmed.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | RT-D2516 / RT-S2516 |
| Product Type | CNC Oscillating Knife Cutting Machine |
| Working Area | 1600 × 2500 mm |
| Overall Dimensions (L × W × H) | 3450 × 2300 × 1250 mm |
| Rated Power | 11 kW |
| Table Type | Auto-feeding conveyor table / flatbed table |
| Tool Head | Swiss imported oscillating knife — full cut and half cut modes with cursor location |
| Translational Velocity | 800–1200 mm/s |
| Cutting Speed | 200–800 mm/s (basis not stated in source — confirm with material and thickness) |
| Repeated Positioning Accuracy | ≤ 0.1 mm |
| Transmission System | Digital servo motor, linear guide, synchronous belt, imported ball screw |
| Instruction Format | HP-GL compatible |
| Voltage | 380V ± 10% |
| Vacuum Pump | 7.5 kW |
| Safety Device | Infrared sensors |
| Servo Motor | Japanese Yaskawa |
| Linear Rail | Taiwan Hiwin |
| Conveyor Belt | German imported |
| Certification | CE |
| Warranty | 12 months (whole machine), 3 months (consumables) |
Application Suitability
| Application | Material or Output |
|---|---|
| Garment and footwear production | Multi-layer woven and knitted fabric, non-woven interlining |
| Leather goods manufacturing | Natural hide, synthetic PU and PVC leather |
| Composite foam fabrication | Sponge-bonded leather, closed-cell EVA, polyethylene foam |
| Signage and display processing | Flexible PVC sheet, soft glass, silicone rubber |
| Gasket and seal production | Rubber sheet, silicone gasket stock, fiber-reinforced composite |
Why Material Thickness Must Drive the Tool Head Choice Before Everything Else
The oscillating knife mode must match the material, not the other way around.
In the advertising and display sector, I have watched buyers specify a working area first and think about material behavior later. A CNC oscillating knife cutting machine manufacturer worth working with will refuse to quote until the material type, thickness and daily volume are on the table. A Swiss imported knife running in full-cut mode on 2 mm PVC sheet produces a clean edge; that same blade oscillating through 8 mm sponge composite without adjusted frequency leaves crushed foam and ragged edges that scrap the entire batch. [NEED_CITE: oscillating knife frequency requirements by material density]
Matching Knife Mode to the Flexible Material on the Table
The RT-D2516/RT-S2516 carries a Swiss imported oscillating knife head that switches between vibration full cutting and half cutting modes. Full cut drives the blade through the entire material thickness in a single pass, suited for leather, rubber and dense composites. Half cut scores the surface layer without penetrating the backing, which is the correct mode for kiss-cut applications on adhesive-backed vinyl and multi-layer laminates where only the top ply is removed.
Cursor location built into the same tool head lets the operator register a reference point before the CNC oscillating knife cutting machine begins its path, reducing first-piece offset errors that waste expensive natural leather hides.
Vacuum Hold-Down That Handles Both Sheet and Roll Stock
The 7.5 kW vacuum pump paired with the flatbed table pulls flexible material flat across the 1600 × 2500 mm working area. When production shifts from cut sheets to continuous rolls, the German imported conveyor belt on the auto-feeding variant advances material through the cutting zone without manual repositioning. [NEED_CITE: vacuum table zoning requirements for small part retention]
This dual-table approach means a footwear factory cutting leather uppers in the morning can switch to roll-fed non-woven interlining in the afternoon without changing machines. The Yaskawa digital servo and Hiwin linear rail combination maintains ≤ 0.1 mm repeated accuracy across both feeding modes.
What the Specification Sheet Actually Means for Production
The 11 kW rated power covers the oscillating knife drive, servo axes and vacuum pump simultaneously, so the machine does not trip breakers when the vacuum pump engages under full load. Translational velocity of 800–1200 mm/s governs rapid moves between cut paths, while cutting speed of 200–800 mm/s applies only during actual material engagement and must be confirmed against each buyer’s material and thickness before quotation.
The HP-GL compatible instruction format integrates with established nesting and pattern-making software already running in most garment and leather workshops. Taiwan Hiwin rails and imported ball screws provide the rigidity needed to hold ≤ 0.1 mm repeated accuracy even when the oscillating knife generates lateral vibration forces at high frequency.
The Cost of Skipping the Material Test
Buyers who skip sample cutting on their own material discover problems only after the machine is installed. A CNC oscillating knife cutting machine configured for thin fabric will struggle with 10 mm sponge composite, producing incomplete cuts that require manual finishing. Half-cut mode left engaged on thick rubber yields scored lines instead of separated parts. [NEED_CITE: common CNC knife cutting defects from incorrect tool head configuration]
Voltage mismatch is equally damaging. A 380V machine delivered to a workshop running 440V three-phase without a transformer will burn the servo driver within the first week, voiding the warranty and halting production.
Why Procurement Happens Here
The design team engineers both knife and table configuration around the buyer’s material rather than forcing a standard package across every industry. Each RT-D2516/RT-S2516 undergoes a factory test using the buyer’s own material sample before dispatch, generating a cutting report that documents edge quality, achievable speed and maximum thickness.
Voltage, plug type and control panel language are confirmed in writing before the machine enters production, eliminating the customs-surprise that stalls installation. The HP-GL software compatibility is verified against the buyer’s existing file format and nesting workflow during the sample stage. Infrared safety sensors are standard on every unit, meeting CE machinery directive requirements without optional upgrades. [NEED_CITE: CE directive compliance for CNC cutting equipment exported to EU markets]
Documentation & Verification
- Machine specification sheet listing confirmed tool head mode and vacuum table type per material
- Electrical schematic and voltage confirmation document signed before production begins
- Sample cutting report on buyer’s own flexible material with edge quality photographs
- Factory test record documenting repeated positioning accuracy across the full 1600 × 2500 mm travel
- HP-GL software license and file format compatibility note for the buyer’s nesting workflow
- Spare parts list with consumable knife blades and belt replacement intervals
Installation, Commissioning & Support
- Floor space of at least 3450 × 2300 mm with level concrete and anchor points for the 11 kW machine
- Dedicated 380V ± 10% three-phase circuit with confirmed plug type before wiring begins
- Conveyor belt and vacuum table assembly completed on-site with belt tension verified
- First-article cutting run supervised to validate speed and knife mode against the buyer’s material
- Operator training covers full-cut versus half-cut switching and HP-GL file import procedures
- Consumable knife blade inventory and Hiwin rail lubrication schedule provided at handover
What to Prepare Before Requesting a Quotation
Send the exact material type, thickness range and maximum sheet or roll width you intend to cut. Confirm your workshop’s voltage and frequency, the control panel language your operators need, and whether your current nesting software outputs HP-GL or DXF. If continuous roll processing is part of your workflow, specify the roll diameter and core size so the auto-feeding table can be matched accordingly.
Frequently Asked Questions
Q: How is cutting speed verified against my specific material and thickness?
A: Before any order is confirmed, your material sample is tested on the RT-D2516/RT-S2516 at the factory. The resulting cutting report documents the achievable speed, edge quality and maximum thickness the oscillating knife can handle on that exact material. The 200–800 mm/s range is a general envelope, and your confirmed speed is written into the specification sheet.
Q: Which oscillating knife mode suits my flexible material?
A: Full cutting mode drives the Swiss imported blade completely through leather, rubber and dense composites in a single pass. Half cutting mode scores only the top layer, which is correct for kiss-cut work on adhesive vinyl and laminates where the backing must remain intact. Your material sample test determines which mode is configured before shipment.
Q: Is the voltage, plug and control language confirmed before shipment?
A: Yes. The electrical schematic and voltage confirmation document is signed by both parties before the RT-D2516/RT-S2516 enters production. The 380V ± 10% supply is verified against your local grid, plug type is specified for your market, and the control panel language is set to match your operators.
Q: Can the machine import my existing nesting files without software conversion?
A: The instruction system is HP-GL compatible, which covers most pattern-making and nesting software used in garment and leather production. During the sample cutting stage, your actual file format is tested to confirm direct import works. If conversion is needed, it is identified and resolved before the machine ships.
Q: What does the sample cutting test on my own material include?
A: You send a representative sample of your flexible material to the factory. The RT-D2516/RT-S2516 is configured with the appropriate knife mode and vacuum setting, then test cuts are run. You receive a report with cut edge photographs, confirmed cutting speed, maximum thickness achieved and the exact tool head configuration documented for your order.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.