Digital CNC Oscillating Knife Cutting Machine for Cloth and Gasket Production Line
Apple Shopping Event
Hurry and get discounts up to 20% Read more
Digital CNC Oscillating Knife Cutting Machine with 1600×2500 mm working area, 800–1200 mm/s translational velocity and auto-feeding conveyor table for continuous fabric and gasket production.
- Oscillating knife tool head with full and half cutting modes, selected per material to avoid ragged edges or crushed foam layers. Vacuum table zoning and ≤0.1 mm repeated accuracy support tight nesting and consistent edge quality across leather, multi-layer fabric, rubber and PTFE gasket sheets.
- Sample cutting on the buyer’s own material with documented edge quality and speed report ensures the configuration matches your specific thickness, sheet size and daily volume before commitment.
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Workflow-Matched Cutting — Oscillating knife and vacuum configuration are specified per material thickness and daily volume rather than sold as a standard working area.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | CNC Oscillating Knife Cutting Machine |
| Working Area | 1600 × 2500 mm |
| Machine Size | 3450 × 2300 × 1250 mm |
| Rated Power | 9 kW |
| Vacuum Pump | 7.5 kW |
| Table Type | Flat working table with vacuum and auto-feeding conveyor |
| Tool Head | Oscillating knife (Swiss-imported blade) with vibration full cutting, half cutting, and cursor location |
| Safety Device | Infrared sensors |
| Translational Velocity | 800–1200 mm/s |
| Cutting Speed | 200–800 mm/s (basis not stated in source — material type and thickness to be confirmed) |
| Repeated Accuracy | ≤0.1 mm |
| Transmission System | Digital servo motor (Japanese Yaskawa), linear guide (Taiwan Hiwin), synchronous belt, ball screw |
| Instruction System | HP-GL compatible format |
| Conveyor Belt | Germany-imported |
| Voltage | 380V ±10% |
| Assembly State | Fully assembled |
Application Suitability
| Application | Material or Output |
|---|---|
| Garment and footwear production | Leather, flexible fabrics, sponge composite leather |
| Gasket manufacturing | Non-asbestos sheets, rubber, graphite, cork, PTFE |
| Automotive interior trim | Foam layers, leather panels, composite materials |
| Signage and soft material processing | PVC, soft glass, silicone, rubber |
What "800 mm/s Cutting Speed" Actually Means for Your Material
A cutting speed figure without a material type, thickness and layer count is not a throughput guarantee — it is a machine travel limit under ideal conditions.
When a production manager sees 200–800 mm/s on a spec sheet, the immediate assumption is that daily output scales linearly with that number. In reality, cutting multi-layer garment fabric with an oscillating knife at full travel speed produces different edge quality than cutting a single layer of 6 mm non-asbestos gasket sheet at the same rate. The vibration full cutting and half cutting modes on this CNC oscillating knife cutting machine for garment and gasket production exist precisely because one speed setting cannot serve both [NEED_CITE: cutting speed variables in oscillating knife operations]. Buyers who skip the sample cutting step and commit on speed alone often discover ragged edges on foam composites or incomplete cuts on denser gasket materials once the machine reaches the factory floor.
Matching Tool Head Behavior to Flexible and Semi-Rigid Stocks
The Swiss-imported oscillating knife blade delivers vibration full cutting for complete penetration through sponge composite leather and multi-layer fabric, while the half cutting mode scores PVC and soft glass without cutting through the release liner. This distinction matters on the production floor: a garment manufacturer cutting nested pattern pieces from bonded textile needs full cutting to separate parts cleanly, whereas a signage producer kiss-cutting vinyl on a backing sheet relies on the half cutting function. The cursor location feature supports manual alignment when CCD contour recognition is not part of the configuration.
Vacuum Zoning and Continuous Feed in High-Volume Runs
The 7.5 kW vacuum pump paired with the flat working table holds flexible materials flat across the 1600 × 2500 mm cutting area. For small garment pattern pieces or narrow gasket strips, inadequate vacuum zoning allows material lift during high-speed traverse — a recurring issue reported by fabric producers running complex nesting layouts [NEED_CITE: vacuum table zoning effect on small part stability]. The auto-feeding conveyor with Germany-imported belt enables continuous roll-to-sheet handling, reducing the idle time between loading individual sheets during long fabric or composite leather cutting runs.
Reading the Drive Train Against Production Tolerances
The Yaskawa digital servo motors and Hiwin linear guides deliver a repeated accuracy of ≤0.1 mm across the full working area. In gasket manufacturing, this tolerance supports tight nesting of non-asbestos and PTFE parts where material cost per sheet is high and scrap reduction directly affects unit economics. The HP-GL compatible instruction system integrates with nesting software that garment and footwear producers already use, avoiding a forced migration to a proprietary CAD environment. The synchronous belt and ball screw transmission maintains positional accuracy over extended cutting cycles without the thermal drift associated with lower-grade linear systems.
The Hidden Cost of Specifying by Working Area Alone
A buyer who selects a machine based solely on 1600 × 2500 mm working area may find the tool head unsuitable for the actual material — an oscillating knife specified for garment fabric can struggle with 10 mm sponge composite leather if blade stroke and vibration frequency are mismatched [NEED_CITE: tool head selection errors in flexible material cutting]. Insufficient vacuum zoning leaves small gasket parts lifting during cutting, producing dimensional drift that shows up only at assembly. Voltage and control language mismatches discovered at commissioning delay production start by days or weeks while transformers and interface boards are sourced locally.
Why Procurement Through This Channel Reduces Configuration Risk
In-house design covers both knife cutting technologies, so the cutting method is matched to the buyer’s material rather than forced into a single platform. Tool head and table configuration are specified per material type, thickness and production volume before the order is confirmed. Sample cutting runs on the buyer’s own material provide documented edge quality and speed data prior to commitment. Software compatibility and HP-GL file format integration are verified during the inquiry stage. Voltage, plug type and control panel language are confirmed against the destination production site before shipment.
Documentation & Verification
- Machine specification sheet listing confirmed tool head and vacuum configuration
- Electrical schematic with 380V ±10% supply and circuit protection detail
- Sample cutting report on buyer’s fabric or gasket material with edge photographs
- Tool head and table configuration list matched to material type and daily volume
- Software licence and HP-GL file format compatibility confirmation
- Factory test record documenting repeated accuracy and conveyor feed alignment
Installation, Commissioning & Support
- Fully assembled delivery at 3450 × 2300 × 1250 mm requires floor space with clearance on all sides
- Dedicated 380V ±10% three-phase circuit rated above the combined 9 kW machine and 7.5 kW vacuum pump draw
- First-run parameter setup for oscillating knife stroke and vibration frequency on buyer’s material
- Operator training covering full cutting, half cutting and cursor location mode switching
- Spare blade and consumable list covering Swiss-imported knife blades and vacuum belt wear parts
- Scheduled maintenance intervals for Hiwin linear guide lubrication and synchronous belt tension check
Before You Request a Quote
Share the specific material types you cut daily — whether garment fabric, sponge composite leather, non-asbestos gasket sheet or PTFE — along with maximum thickness and typical layer count. Specify your local voltage standard, control language preference and the nesting software currently in your workflow. If you require sample cutting on your own material stock before configuration is locked, provide a representative sheet or roll sample.
Frequently Asked Questions
Q: How do I verify that the quoted cutting speed applies to my material?
A: Request a sample cutting report run on your actual fabric or gasket stock, documenting the speed, edge quality and number of layers cut. The 200–800 mm/s range on the spec sheet reflects machine travel capability, not guaranteed throughput across all materials. Production speed depends on material density, thickness and the cutting path complexity of your nesting layout.
Q: When should I use oscillating knife versus drag knife on this platform?
A: Oscillating knife handles thicker sponge composite leather, multi-layer fabric and semi-rigid gasket materials where the vibrating blade action prevents crushing and delamination. Drag knife suits thin vinyl, single-layer fabric and film where a static blade pulled through the material is sufficient. Tool head selection is confirmed during the sample cutting stage based on your actual stock.
Q: Does the vacuum table hold small nested pattern pieces securely?
A: The 7.5 kW vacuum pump provides holding force across the 1600 × 2500 mm table, but small garment pieces or narrow gasket strips can lift if vacuum zones are not matched to the nesting layout. Zoning configuration should be specified based on your typical part size range and confirmed during the sample cutting test on your material.
Q: Can I import my existing nesting files into this machine?
A: The HP-GL compatible instruction system accepts standard plotter formats used in garment and gasket nesting workflows. File format compatibility is verified during the inquiry stage along with any nesting software integration requirements. Confirm your current CAD output format before configuration is finalized.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.