Packaging CNC Cutting Machine for Carton Sample Making – Industrial Application
Apple Shopping Event
Hurry and get discounts up to 20% Read more
RT-D2516/RT-S2516 Packaging CNC Cutting Machine, 1600×2500mm, 9kW — configured for carton sample making and short-run packaging production.
- Swiss imported oscillating knife head supports full cutting, half cutting and creasing in one setup
- 7.5kW vacuum pump with auto-feeding conveyor holds corrugated and grey board stock during high-speed traverse
- ≤0.1mm repeatability via Yaskawa servo and Hiwin linear rail ensures tight register on printed carton contours
Sample cutting on your own board stock is completed before order commitment, with tool head and vacuum zone layout specified per your actual production mix.
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Swiss knife configuration — the oscillating head runs full-cut, half-cut and cursor location routines in a single setup, matched to your actual board stock and flexible material mix.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | RT-D2516/RT-S2516 |
| Product Type | CNC Oscillating Knife Cutting Table |
| Working Area | 1600×2500 mm |
| Machine Size (L×W×H) | 3450×2300×1250 mm |
| Rated Power | 9 kW |
| Voltage | 380V ±10% (frequency to be confirmed for target market) |
| Table Type | Vacuum table with auto feeding |
| Vacuum Pump | 7.5 kW |
| Multifunctional Head | Swiss imported knife — vibration full cutting, vibration half cutting, cursor location |
| Safety Device | Infrared sensors |
| Translational Velocity | 800–1200 mm/s |
| Repeated Accuracy | ≤0.1 mm |
| Servo Motor | Japanese Yaskawa |
| Linear Rail | Taiwan Hiwin |
| Transmission System | Digital servo motor, linear guide, synchronous belt, imported ball screw |
| Conveyor Belt | Germany imported |
| Instruction System | HP-GL compatible format |
| Warranty | 12 months whole machine, 3 months consumables (verify against current policy) |
Application Suitability
| Application | Material or Output |
|---|---|
| Carton sample making and prototyping | Grey board, corrugated board, folding carton stock |
| Gift box structure cutting | Cardboard, grey board, decorative laminates |
| Sticker and label contour cutting | Self-adhesive vinyl, label stock, reflective film |
| Signage and display production | PVC foam board, corrugated plastic, acrylic sheet |
| Leather and flexible material cutting | Genuine leather, PU, synthetic textile |
| Sponge and composite processing | Foam laminates, sponge composite leather, soft gasket stock |
What the Working Area Spec Leaves Out About Packaging CNC Cutting Machine Selection
A 1600×2500 mm table only tells you the sheet size it accepts — not whether the vacuum zoning will hold your small carton blanks flat at full traverse speed.
I once stood next to a machine nearly this size watching corrugated sample pieces lift off the table mid-cut because the vacuum zones were designed for large sheets, not the narrow strips left after a nesting layout runs. The operator slowed the head down to compensate, which doubled the cycle. A Packaging CNC Cutting Machine for industry application needs its vacuum layout matched to the actual parts being produced, not just the largest sheet you plan to buy. [NEED_CITE: vacuum zoning design principles for flatbed cutting tables]
How the Tool Head Defines What You Can Actually Cut
The Swiss imported oscillating knife on this Packaging CNC Cutting Machine supports three modes — vibration full cutting, half cutting and cursor location — in a single head. Full cutting handles grey board and corrugated stock through the entire thickness, while half cutting scores crease lines without breaking the backing. Cursor location ties the cut path to printed registration marks for sticker and label contour work. This means a sample maker running carton prototypes in the morning and vinyl stickers in the afternoon can stay on the same table without swapping tool heads or recalibrating offsets.
Holding the Workpiece Through the Entire Cycle
The 7.5 kW vacuum pump paired with the auto-feeding conveyor keeps sheet stock pinned during high-speed passes up to 1200 mm/s translational velocity. The Germany-imported belt feeds material into position for successive cuts without manual repositioning, which matters when a packaging sample order involves multiple board grades in one shift. [NEED_CITE: continuous feed system requirements for digital flatbed cutters]
Reading the Specs That Actually Affect Output Quality
The ≤0.1 mm repeated accuracy comes from the Yaskawa servo and Hiwin linear rail combination. For packaging sample work, that tolerance keeps crease lines aligned with printed graphics across a run of carton blanks. The HP-GL compatible instruction system accepts file formats from common packaging CAD packages, so the nesting and cut-path data generated in your design software transfers without manual re-drawing. A 9 kW rated power draw covers the servo, vacuum pump and head drive combined, which is relevant when sizing the dedicated circuit in your workshop. The infrared safety sensors stop travel if an operator enters the cutting zone — a baseline requirement for any facility running unsupervised after-hours batches.
The Cost of Skipping the Material Trial
I have seen buyers specify a machine on table size and price, then discover on delivery that the standard vacuum layout cannot hold the small offcuts their nesting software produces. The edges come out ragged, the board shifts mid-path, and an entire batch of carton samples has to be scrapped. When the vacuum zones are not matched to the part geometry, slowing the head down is the only workaround, and that erases whatever throughput advantage the specification sheet suggested. [NEED_CITE: material holding challenges in digital flatbed cutting]
Why Source This Packaging CNC Cutting Machine Here
The design and build team covers both knife and laser cutting under one roof, so the cutting method is selected based on your material rather than forcing everything through one technology. Tool head and table configuration are specified per material and production volume before the order is locked. Sample cutting runs on your own board stock and flexible materials generate a documented report you review before commitment. Software compatibility — file format, nesting workflow and HP-GL import — is confirmed in writing prior to production. Voltage, plug type and control language are set to your market requirements before the machine leaves the factory.
Documentation & Verification
- Sample cutting report on your corrugated and grey board stock before order confirmation
- Tool head and vacuum zone configuration list matched to your production mix
- Electrical schematic with voltage and frequency confirmed for your local grid
- HP-GL file format and nesting software compatibility note signed before build
- Factory test record documenting repeatability and edge quality on your materials
- Spare parts list covering knife blades, belts and vacuum seals
Installation, Commissioning & Support
- 3450×2300 mm footprint requires a level concrete floor with clearance for auto-feed infeed
- 9 kW rated load plus 7.5 kW vacuum pump need a dedicated 380V circuit with confirmed frequency
- Machine ships with table and frame separated; reassembly includes linear rail alignment check
- First-run commissioning covers vacuum zone mapping and servo tuning for your board thickness
- Operator training addresses knife depth setting, HP-GL file import and crease-line calibration
- Consumable kit includes replacement oscillating blades, conveyor belt segments and vacuum seals
What to Share Before Requesting a Quote
Send the actual board grades and flexible materials in your production mix, including thickness ranges and whether you run printed or unprinted stock. Let us know your local voltage and frequency, the control language your operators need, and whether your existing CAD software outputs HP-GL. If possible, ship a sample pack of your materials so we can run test cuts and document edge quality and crease accuracy before building your configuration.
Frequently Asked Questions
Q: How do I verify cutting depth and edge quality on corrugated versus grey board?
A: Send us samples of both materials at the thicknesses you run most often. We perform test cuts using the oscillating knife at production speed and document edge condition, crease alignment and any delamination. You receive the sample cutting report showing results on your specific stock before confirming the order.
Q: Can the vacuum table hold small sticker parts without lift at full speed?
A: The vacuum zone layout is configured based on your typical nesting output. We review your part geometry and adjust zone boundaries so narrow carton blanks and small sticker contours stay pinned during 800–1200 mm/s traverse. Zone mapping is validated during the factory test before shipment.
Q: Which tool head setup handles both creasing and full cutting for packaging samples?
A: The Swiss imported multifunctional head runs vibration full cutting for through-cuts, half cutting for crease lines and cursor location for printed contour registration — all in one setup. This lets you prototype a folding carton with scored fold lines and cut outlines without changing tools mid-job.
Q: Does the software accept my existing CAD files and nesting workflow?
A: The instruction system is HP-GL compatible, covering most packaging CAD outputs. Before the order, we confirm your specific software version and file export settings, run a test import and nesting cycle, and document compatibility in writing so there are no surprises at commissioning.
Q: What voltage and control language options are available for my market?
A: The standard configuration is 380V ±10%, with frequency confirmed for your local grid — typically 50 Hz or 60 Hz. Plug type and control panel language are set before shipment. We provide the electrical schematic showing the exact configuration for your facility’s installation team.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.