Industrial Application CNC Packaging Cutting Machine for Carton

In-house knife and laser design — the RT-D2516/RT-S2516 pairs an oscillating knife head with a creasing wheel on one flatbed, so carton converters cut and crease without forcing one method onto every board grade.

Technical Specifications

Application Suitability

Why Board Grade Determines the Real Cutting Speed

Matching tool head to flute profile is the only honest way to quote throughput on a CNC packaging cutting machine.

Production managers see a travel speed of 800 mm/s on a spec sheet and plan daily output around it. In practice, a vibration knife running through double-wall corrugated at that pace will crush the flutes and leave ragged edges. Slowing the head down fixes the edge but changes the shift output entirely. I once watched a converter run a 400 g greyboard sample perfectly, then switch to E-flute corrugated on the same tool setting and scrap an entire batch because the crease wheel could not penetrate the liner [NEED_CITE: board grade effect on creasing wheel penetration depth]. The cutting speed range of 200 – 800 mm/s only becomes meaningful once the operator knows which flute and weight are on the table.

Multifunctional Head Configuration for Carton Workflows

The Swiss imported multifunctional knife head on this CNC packaging cutting machine combines vibration full cutting, vibration half cutting and cursor location in one unit. A single pass can score a crease line, half-cut a fold tab and fully cut the outer contour without a tool change. For short-run carton producers who switch between E-flute gift boxes and B-flute shipping cartons multiple times per shift, that flexibility removes the die inventory and setup downtime that physical tooling demands.

Vacuum Hold-Down and Small Part Stability

The aluminum alloy honeycomb vacuum adsorption platform paired with the 7.5 kW vacuum pump maintains uniform suction across the 1600 × 2500 mm working area. When cutting nested sticker sheets or small tag blanks from a full board, inadequate zoning lets lightweight pieces lift into the knife path, producing miscuts and head strikes. A properly configured vacuum table on this CNC packaging cutting machine keeps every nested part flat even at the upper translational velocity range [NEED_CITE: vacuum zoning requirements for small-part digital cutting].

Reading the Specs Against Your Production Reality

The repeated accuracy of ≤ 0.1 mm matters most on packaging jobs where die-line registration must align with pre-printed graphics; drift beyond that tolerance shows as visible misalignment on assembled cartons. The rack-and-pinion transmission combined with imported straight-line square guides maintains that tolerance over the full 2500 mm travel, which is where belt-driven systems on lighter machines tend to accumulate positional error on longer sheets. Cutting thickness capacity is listed at up to 100 mm, but that figure shifts depending on whether the material is solid greyboard or compressible corrugated — the knife must penetrate without crushing the flute structure underneath. The 9 kW rated power and 380 V ± 10 % supply requirement mean the machine needs a dedicated circuit with stable voltage; brownouts on shared factory lines can interrupt the servo drives mid-cut. Software accepts HP-GL compatible format, which covers most mainstream packaging CAD outputs, and the professional carton nesting module handles layout optimization to reduce board waste across a production run.

The Cost of Specifying on Working Area Alone

Choosing a flatbed digital cutter based solely on sheet size ignores how material behaviour changes the job. A 1600 × 2500 mm table fits a full corrugated sheet, but if the vacuum zoning cannot hold small nested parts flat, the operator spends time repositioning stock and clearing miscut pieces. I have seen packaging shops buy a machine that handled their 300 g card sample perfectly, only to discover the creasing wheel could not score through heavier flute profiles at production pace, forcing a second manual creasing step that erased the time savings [NEED_CITE: creasing wheel pressure requirements across flute grades]. Wrong tool head selection on foam-core boards produces crushed cores instead of clean edges, and those defects often surface only after the first full production run.

Why Converters Source This Equipment Here

The manufacturer designs and produces both knife and laser cutting systems in-house, so a packaging buyer selects the cutting method that fits the board grade instead of being locked into one technology. Tool head and table configuration are specified per material and production volume before the order is confirmed. Sample cutting runs on the buyer’s own corrugated or card stock, providing physical evidence of edge quality, crease definition and vacuum hold-down before commitment. Voltage, plug type and control language are confirmed in writing prior to shipment, avoiding on-site rewiring or operator confusion. The professional carton nesting software and HP-GL file compatibility are verified against the buyer’s existing artwork workflow to ensure the machine drops into the current production chain without a software overhaul.

Documentation & Verification

• Machine specification sheet listing RT-D2516/RT-S2516 working area, power and transmission details
• Electrical schematic with 380 V ± 10 % circuit requirements and wiring diagram
• Tool head and vacuum table configuration list matched to your board grade
• Sample cutting report on your corrugated or card stock with edge and crease photos
• Operation and maintenance manual with language options confirmed at order
• Software licence and HP-GL file format compatibility note for your CAD workflow

Installation, Commissioning & Support

• Dedicated 380 V ± 10 % circuit with capacity for 9 kW rated power plus 7.5 kW vacuum pump
• Floor space allocation for 3450 × 2300 × 1250 mm machine footprint plus auto-feeding conveyor clearance
• Assembly and levelling of the aluminum alloy honeycomb vacuum platform on site
• First-run calibration of repeated accuracy to ≤ 0.1 mm across the full 1600 × 2500 mm travel
• Operator training on vibration full cutting, half cutting and cursor location tool head settings
• Spare parts list covering Swiss imported knife blades, conveyor belt segments and vacuum seals

Preparing Your Inquiry

Send the specific board grades, flute profiles and sheet weights your line runs, along with typical daily volume and the CAD file formats your design team uses. Confirm your facility voltage and frequency, preferred control language, and whether you need sample cutting on your own stock before placing the order.

Frequently Asked Questions

Q: How do I verify the cutting speed for my specific board grade and flute?
A: The 200 – 800 mm/s cutting speed range varies with material density and flute structure. Send your actual board samples — including the heaviest corrugated and lightest card you run — so a test cut confirms achievable speed while maintaining clean edges and defined creases. We provide a sample cutting report documenting the results before you commit to the order.

Q: Which tool head handles my mix of creasing, half-cut and full-cut carton jobs?
A: The Swiss imported multifunctional head on the RT-D2516/RT-S2516 combines vibration full cutting, vibration half cutting and cursor location in one unit. For your job mix, we confirm the tool head configuration against your specific flute profiles and board weights, so creasing, perforating and contour cutting happen in a single pass without manual tool changes.

Q: What voltage and control language are confirmed before shipment?
A: The machine is rated at 380 V ± 10 %, but voltage, plug type and control panel language are confirmed in writing before production. Control software supports English, Russian, Italian and Chinese, with other languages available on request, so your operators work in a familiar interface from day one.

Q: Can I run a sample cut on my own corrugated stock before ordering?
A: Yes. Ship your actual board materials — including different flutes and weights — and we run them on the RT-D2516/RT-S2516. You receive a sample cutting report with edge quality photos, crease definition assessment and vacuum hold-down performance at production speed before any purchase commitment.

Q: How does the nesting software integrate with my existing CAD artwork?
A: The professional carton nesting software accepts HP-GL compatible format, covering most mainstream packaging CAD outputs. Before the order, we verify file format compatibility with your design workflow and confirm the nesting module handles your typical sheet layout to optimise material yield across production runs.