Multipurpose Cardboard Sticker Cutting Machine V-Cut | for Packaging

Tool head matched to material before order — sample cutting on your own cardboard and sticker stock confirms edge quality, crease depth, and contour accuracy prior to commitment.

Technical Specifications

Application Suitability

Why Cutting Depth Claims Fail on Your Actual Board

The real cutting depth depends on the tool head configuration and material density, not on the working area alone. Many packaging producers specify a machine by table size, then discover on the first production run that the oscillating knife cannot cleanly penetrate high-density corrugated or double-wall board at the quoted speed. A CNC digital cutting machine for packaging production line work must be validated against your specific flute profile, grammage, and sheet thickness before the configuration is locked. The difference between a clean V-cut crease and a crushed edge often comes down to knife angle, oscillation frequency, and downward pressure — parameters that shift when you move from standard grey board to dense flute or coated stock [NEED_CITE: material density and knife geometry interaction in flatbed cutting].

Tool Head Selection Defines What You Can Actually Cut

The multifunctional head on this unit carries a Swiss imported knife capable of vibration full cutting, vibration half cutting, and cursor location in one setup. For packaging sample making, half cutting scores the crease line without penetrating the liner, while full cutting separates the blank from the sheet. Switching between these modes on the same head eliminates tool change downtime during a carton prototype run.

Vacuum Zoning and Small-Part Stability

A 7.5kW vacuum pump paired with a flat vacuum table provides the hold-down force needed across the 1600×2500mm bed. The Germany imported conveyor belt supports auto feeding for continuous sheet loading. When cutting small sticker contours or narrow carton flaps, zoned vacuum channels prevent lift at the trailing edge — a common failure point when the entire table is treated as one suction zone [NEED_CITE: vacuum table zoning and small part retention in digital cutting].

Specs That Matter on the Shop Floor

The 9kW rated power covers the servo drives, vacuum pump, and oscillating knife motor simultaneously, so the machine does not trip a breaker when all axes and the pump run together. Repeated accuracy of ≤0.1mm across the full 1600×2500mm travel is maintained by Taiwan Hiwin linear rails and ball screw drives — components that resist deflection under the lateral forces generated during dense board cutting. Delta servo motors deliver the acceleration needed for the 800-2000mm/s translational velocity between cut paths, reducing non-cutting travel time on complex nesting layouts. HP-GL compatible instruction format means files from common packaging CAD systems import without intermediate conversion, avoiding geometry loss in crease lines and perforation patterns.

The Cost of Skipping the Material Trial

When a machine is ordered on working area and price alone, the first production run becomes the commissioning test. Ragged edges on coated board, incomplete kiss-cuts on sticker stock, and crease cracking on high-density flute all trace back to tool head and pressure settings that were never matched to the actual material. Retooling and recalibrating after installation costs more than a pre-shipment sample test on your own stock [NEED_CITE: pre-shipment material testing in CNC cutting equipment procurement].

What You Get by Sourcing Here

Both knife cutting and laser cutting technologies are developed in-house, so the cutting method is matched to your material rather than forced into one approach. Every configuration is specified per material type and production volume — the RT-D2516/RT-S2516 is not sold as a generic flatbed but as a configured system. CCD camera positioning is confirmed for printed contour work on your actual sticker or packaging artwork before the order is placed. Software compatibility is verified against your existing file formats during the inquiry stage. Voltage, control language, and plug type are confirmed to match your local electrical standards before the machine enters production. Sample cutting on your own material is standard procedure, and a sample report ships with the machine.

Documentation & Verification

• Machine specification sheet listing confirmed tool head and table configuration
• Electrical schematic with voltage and frequency matching your local supply
• Sample cutting report produced on your board and sticker material
• Factory test record documenting accuracy and cut quality before crating
• Operation and maintenance manual with HP-GL file import procedure
• Spare parts list identifying knife blades, belts, and vacuum seals

Installation, Commissioning & Support

• Floor space of at least 4000×2800mm required to accommodate the 3450×2300mm footprint and material staging
• Dedicated 380V three-phase circuit with stable supply confirmed before the RT-D2516/RT-S2516 is powered on
• Machine ships in modular sections; reassembly on-site includes table leveling and rail alignment
• First-run commissioning covers vacuum pressure calibration and oscillation frequency tuning for your material
• Operator training includes HP-GL file import, nesting setup, and tool head changeover
• Consumable knife blades and vacuum seals supplied as initial spare parts

What We Need to Quote Accurately

Send us the material types you cut — board grade, flute profile, sticker stock — along with sheet dimensions and typical thickness range. Let us know your local voltage and frequency, the control language your operators prefer, and whether your existing design software outputs HP-GL or requires format conversion. If you have upstream printers or downstream folding equipment, share the workflow so we can match feed rates and sheet handling accordingly.

Frequently Asked Questions

Q: How is cutting speed determined for my specific packaging material?
A: The 200-800mm/s range applies depending on material type, thickness, and cut geometry. We run your actual board and sticker stock on the RT-D2516/RT-S2516 before shipment, document the speed and knife pressure that produce clean edges, and include that report with the machine. Your production speed is confirmed through this sample test, not assumed from a catalog value.

Q: Can the vacuum table hold small sticker pieces without shifting?
A: The flat vacuum table with a 7.5kW pump provides zoned suction across the 1600×2500mm bed. For small contour-cut stickers and narrow labels, we configure the vacuum zones during commissioning so suction concentrates under the active cutting area, preventing lift on lightweight and small-format material.

Q: Will my existing packaging design files work with the control system?
A: The instruction system accepts HP-GL compatible format, which covers most packaging CAD outputs. During the inquiry stage we ask for sample files from your design software and verify import accuracy — including crease lines, perforations, and contour paths — before the machine is built.

Q: What electrical preparation is needed before delivery?
A: The RT-D2516/RT-S2516 requires 380V±10% three-phase power with a dedicated circuit rated for the 9kW load. We confirm your local voltage and frequency during order, supply an electrical schematic, and recommend a stabilizer if your supply fluctuates outside the tolerance range.

Q: Can we visit the factory to see the machine run our material?
A: Yes. We schedule a sample cutting session using your board, sticker, or carton stock. You review cut quality, crease depth, and contour accuracy on-site. The machine configuration is finalized based on these results before production begins.