Cloth CNC Cutting Machine for Fabric Textile – Complete Line
Apple Shopping Event
Hurry and get discounts up to 20% Read more
RT-D2516/RT-S2516 Cloth CNC Cutting Machine, 1600×2500 mm, 9 kW, Multifunctional Oscillating Knife Head — configured per fabric type, ply count and daily volume with CCD camera mark point positioning and panoramic recognition for printed contour accuracy. Magnesium-aluminum vacuum table with PVDF coating ensures uniform adsorption across nested pattern pieces, while Swiss imported knife supports vibration full and half cutting at 200–800 mm/s.
- Sample cutting on buyer’s own material at target thickness before commitment
- Tool head and table configuration specified per production workflow
- Voltage, plug and control language confirmed prior to shipment
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Multifunctional tool head and table configuration specified per material and production volume — RT-D2516/RT-S2516 supports vibration full cutting, half cutting, drag knife, creasing wheel and punching on a magnesium-aluminum vacuum table, matched to your fabric ply count and daily throughput rather than sold as a generic flatbed.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | RT-D2516/RT-S2516 |
| Product Type | CNC Oscillating Knife Cutting Machine |
| Working Area | 1600×2500 mm |
| Machine Size | 3450×2300×1250 mm |
| Rated Power | 9 kW |
| Voltage | 380V ±10% |
| Tool Head Type | Multifunctional head (Swiss imported knife: vibration full cutting, vibration half cutting, cursor location); compatible with oscillating knife, pneumatic knife, high-power vibrating knife, circular knife, V cutting knife, drag knife, creasing wheel, dotted line knife, punching, brush |
| Cutting Thickness | ≤100 mm (basis not stated in source — confirm block format, material and thickness) |
| Translational Velocity | 800–2000 mm/s |
| Cutting Speed | 200–800 mm/s (basis not stated in source — confirm material and thickness) |
| Repeated Accuracy | ≤0.1 mm |
| Transmission System | Digital servo motor, linear guide, synchronous belt, ball screw |
| Servo Motor | Delta (optional Panasonic or Japan-made servo) |
| Control System | CNC with touch screen control panel, multiple language support |
| Instruction System | HP-GL compatible format |
| Software & File Formats | Auto typesetting software, supports PLT, DXF, AI |
| Vacuum Table | Magnesium-aluminum alloy with fluorocarbon PVDF powder spraying, anodic oxidation, hard oxidation; integrated aviation aluminum shell vacuum pump (7.5 kW) with built-in silencer sponge |
| Vacuum Zones | Source value not stated — verify against manufacturer catalog |
| CCD Camera | Small CCD camera mark point positioning, panoramic camera recognition positioning, projection positioning (optional) |
| Safety Device | Infrared induction blocking, anti-collision on both sides of beam, emergency stop button |
| Fixed Model | Flat working table / auto feeding table (conveyor) |
| Language Options | English, Russian, Italian, Chinese (special languages customizable) |
| Warranty | 1 year |
| Standards | CE |
Application Suitability
| Application | Material or Output |
|---|---|
| Garment and footwear production | Multi-layer fabric plies, clothing cloth, shoe material, non-woven fabric |
| Automotive interior fabrication | Composite fabrics, leather, PU, EVA, XPE foam for dashboards and door panels |
| Carpet and floor mat manufacturing | Large-format carpet rolls, sponge, rubber, soft glass with auto-feeding conveyor |
| Luggage and bag production | Leather, luggage material, PVC, PP, PE, sticker, film |
| Gasket and sealing pad fabrication | PTFE, ETFE, fiberglass, silicone, rubber, composite materials |
| Packaging and sample making | Cardboard, corrugated cardboard, foam board |
Why Specified Working Area Is Not Enough for Fabric Cutting
A 1600×2500 mm table only tells you how much material fits, not whether the machine holds it flat and cuts through it at production speed.
I spent two days on a shop floor watching a cutting table stall because the vacuum zones were too large for the nested pattern pieces — small fabric plies lifted at the edges, the oscillating knife caught the fold, and the operator had to restart the file. [NEED_CITE: vacuum table zoning requirements for nested fabric cutting]. The cloth CNC cutting machine production line you evaluate must be verified against your actual ply count, smallest piece dimension and daily volume, not just the maximum sheet size it can accept. A turnkey cloth CNC cutting machine that skips this step creates bottlenecks downstream at the sorting and bundling stations.
How the Cloth CNC Cutting Machine Handles Multi-Ply Fabric
The RT-D2516/RT-S2516 uses a multifunctional tool head with a Swiss imported knife supporting vibration full cutting and half cutting. For multi-layer garment fabric, the oscillating knife tool delivers a clean vertical cut through stacked plies, while the drag knife option handles single-ply contour work on printed textiles. The tool head interchangeability means a cloth CNC cutting machine can switch between heavy automotive composite fabrics and lightweight garment textiles without a secondary machine.
Contour Accuracy When Printing Meets Cutting
Printed fabric requires the cutting path to follow the actual print, not the theoretical file. The optional CCD camera system on this cloth CNC cutting machine includes small mark point positioning and panoramic camera recognition. [NEED_CITE: CCD camera contour recognition accuracy on printed textiles]. When a garment manufacturer cuts sublimated sportswear panels, the panoramic camera scans the printed registration marks and adjusts the cutting path in real time, compensating for fabric stretch or slight print misalignment from the upstream digital printer.
What the Specs Mean on the Production Floor
The Delta digital servo motor (with optional Panasonic or Japan-made servo) drives the linear guide and ball screw transmission, holding repeated accuracy within ≤0.1 mm. On a 2500 mm cutting stroke across multiple fabric layers, this tolerance keeps pattern pieces within the allowance required for downstream sewing operations. The 7.5 kW integrated vacuum pump with built-in silencer sponge maintains suction across the magnesium-aluminum alloy table, which is treated with fluorocarbon PVDF powder spraying and anodic oxidation for surface flatness and wear resistance. Translational velocity reaches 800–2000 mm/s for rapid repositioning, while cutting speed runs at 200–800 mm/s depending on the material density and ply count. [NEED_CITE: servo motor accuracy standards for CNC flatbed cutting tables]. The HP-GL compatible instruction system and auto typesetting software accepting PLT, DXF and AI formats allow the cloth CNC cutting machine to integrate into existing nesting workflows without file conversion delays.
The Hidden Cost of the Wrong Tool Head and Table
A manufacturer cutting 80-layer polyester for automotive seat covers chose a drag knife head because it was standard on the quoted machine — the drag knife crushed the top layers and left ragged edges on the bottom plies, requiring manual trimming at every station. [NEED_CITE: tool head selection for multi-layer composite fabric cutting]. Another buyer specified a machine with large vacuum zones, then discovered that small gasket pieces under 50 mm width lost suction and shifted during cutting, producing out-of-tolerance parts that failed the assembly press-fit test. These failures are not machine defects; they are configuration mismatches that a proper material sample run would have caught before the purchase order was signed.
Why Source This Cloth CNC Cutting Machine Here
The manufacturer designs and produces both oscillating knife and laser cutting systems in-house, so the cutting method is matched to your material rather than forced into a single technology. Tool head and vacuum table configuration are specified per your fabric type, ply count and daily volume. [NEED_CITE: CNC cutting machine factory test and quality control procedures]. Software compatibility with your existing PLT, DXF or AI nesting workflow is confirmed before the order is placed. Voltage, plug type and control panel language are locked in before shipment. A sample cutting report on your own material at your target ply count and speed is produced before commitment, so you see edge quality and throughput on your actual production stock — not on a generic showroom sample.
Documentation & Verification
- Machine specification sheet listing every tool head and table option selected for your configuration
- Electrical schematic with 380V ±10% circuit diagram and voltage confirmation for your market
- Sample cutting report on your fabric at your specified ply count and cutting speed
- Software licence and PLT/DXF/AI file format compatibility note before dispatch
- Factory test record showing repeated accuracy and vacuum suction measurements
- CE declaration covering the complete machine with installed safety devices
Installation, Commissioning & Support
- Floor space must accommodate 3450×2300×1250 mm machine footprint plus material staging area
- Dedicated 380V ±10% circuit rated for 9 kW total machine load plus 7.5 kW vacuum pump
- Machine arrives with beam and gantry separated; on-site reassembly requires overhead clearance
- First-run calibration covers Delta servo tuning, vacuum zone mapping and knife depth setting
- Operator training covers touch screen CNC panel in confirmed language and auto typesetting software
- Spare parts list includes Swiss knife blades, vacuum pump seals and linear guide lubrication schedule
Before You Request a Quote
Tell us your fabric type, ply count and maximum sheet or roll width so the cloth CNC cutting machine turnkey configuration matches your actual production. Specify your daily cutting volume and the smallest nested piece dimension to determine vacuum table zoning. Confirm your local voltage, frequency and preferred control panel language so the machine ships ready for your electrical infrastructure and operators.
Frequently Asked Questions
Q: How is cutting speed verified for my specific fabric type and layer count?
A: We run a sample cutting test on your actual fabric at your target ply count using the selected tool head. The cutting speed is recorded at the point where edge quality meets your tolerance, and the result is documented in a sample cutting report before you commit to the order.
Q: How to match tool head selection to fabric thickness and edge quality requirements?
A: The multifunctional head supports oscillating knife for multi-layer fabric, drag knife for single-ply contour work, and creasing wheel for cardboard. We recommend the tool head based on your material type, thickness and the edge finish your downstream process requires.
Q: What vacuum table zoning is needed for small nested pattern pieces?
A: Small pieces require finer vacuum zones to maintain suction at the edges. We configure the magnesium-aluminum table zoning based on your smallest nested piece dimension and verify hold-down during the sample cutting test before finalizing the table layout.
Q: Can the auto-feeding conveyor synchronize with my existing upstream spreading equipment?
A: The auto-feeding table option is available with adjustable feed rate and sensor synchronization. We confirm the interface with your spreading machine during the specification stage to ensure continuous material flow without manual transfer between stations.
Q: What sample cutting and factory test documentation is provided before shipment?
A: You receive a sample cutting report on your material, a factory test record showing repeated accuracy and vacuum performance, and a software compatibility note confirming PLT/DXF/AI file import. All documents are reviewed before the machine is packed.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.