2516 CNC Fabric Cutter for Garment – Industry Application
Apple Shopping Event
Hurry and get discounts up to 20% Read more
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm Working Area, 9kW Rated Power, Auto-Feeding Conveyor — pairs a Swiss oscillating knife head with zoned vacuum hold-down to prevent fabric lift during multi-ply garment cutting. Japanese Yaskawa servo and Hiwin linear rail deliver ≤0.1mm repeatability across the full table. – HP-GL compatible instruction system integrates with existing nesting and marker-making workflows – 7.5kW vacuum pump with conveyor zoning specified per your smallest pattern piece – Sample cutting report on your own fabric at stated ply count and production speed confirms edge quality before commitment
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Material-matched cutting — Every RT-D2516/RT-S2516 configuration starts with a sample cut on the buyer’s own roll before the specification is locked, preventing the mismatch between table size and actual material behavior on the production floor.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | RT-D2516/RT-S2516 |
| Product Type | CNC Oscillating Knife Cutting Machine |
| Working Area | 1600×2500 mm |
| Machine Size (L×W×H) | 3450×2300×1250 mm |
| Rated Power | 9 kW |
| Table Type | Flat working table with vacuum and conveyor belt |
| Multifunctional Head | Swiss imported knife — vibration full cutting, vibration half cutting, cursor location |
| Safety Device | Infrared sensors |
| Translational Velocity | 800–1200 mm/s |
| Cutting Speed | 200–800 mm/s (basis not stated in source — confirm material type, thickness and layer count) |
| Repeated Accuracy | ≤0.1 mm |
| Transmission System | Digital servo motor, linear guide, synchronous belt, imported ball screw |
| Instruction System | HP-GL compatible format |
| Voltage | 380V ±10% |
| Servo Motor | Japanese Yaskawa |
| Linear Rail | Taiwan Hiwin |
| Vacuum Pump | 7.5 kW |
| Conveyor Belt | Germany imported |
| Feeding System | Auto feeding |
Application Suitability
| Application | Material or Output |
|---|---|
| Garment and apparel production | Multi-ply woven and knit fabric for sportswear, uniforms and fashion apparel |
| Footwear and leather goods | Natural leather, synthetic PU leather and microfiber for shoe uppers and bags |
| Automotive interior fabrication | Sponge composite leather, PVC and coated fabric for seat covers and door panels |
| Gasket and seal production | Soft glass, silicon and rubber sheet for industrial gasket cutting |
Why "2516 Working Area" Alone Does Not Guarantee Production Speed
A large table only delivers throughput when vacuum zoning, conveyor grip and knife frequency are matched to the buyer’s actual fabric weight and ply count.
Many fabric cutting rooms discover that a machine sized by working area alone cannot hold small pattern pieces flat at cutting speed. Edges fray on coated composites, the conveyor slips on slippery synthetics, and throughput drops well below expectations. These problems are not visible in the brochure — they appear on the first production day. [NEED_CITE: material hold-down challenges in high-speed fabric cutting]
Conveyor and Vacuum Zoning for Continuous Fabric Feeding
The auto-feeding system paired with a Germany-imported conveyor belt allows roll-to-cut workflow across the full 1600×2500 mm working area. The 7.5 kW vacuum pump provides hold-down force distributed through zoned sections of the flat table. When the vacuum zones are configured around the buyer’s smallest garment pattern piece, fabric lift at translational velocities of 800–1200 mm/s is prevented. This zoning conversation must happen before the table is built, not after installation.
Knife Head Configuration per Fabric Type
The Swiss imported oscillating knife head offers vibration full cutting, vibration half cutting and cursor location modes. For lightweight woven fabrics in multi-ply lay-ups, oscillation frequency and blade angle need a different setting than for coated composite leather used in automotive interiors. I have seen a setup that ran standard polyester cleanly in samples, then produced frayed edges on the buyer’s actual coated composite fabric — requiring days of re-tuning frequency, vacuum zoning and blade angle before the CNC oscillating knife cutting machine production line ran correctly. [NEED_CITE: oscillation frequency matching to coated and composite textiles]
Reading the Specs That Actually Matter on the Floor
Repeated accuracy of ≤0.1 mm across the working area is maintained by the combination of Japanese Yaskawa digital servo motors and Taiwan Hiwin linear rails. This tolerance matters when nesting tight garment markers where a half-millimeter drift compounds across dozens of pieces. The HP-GL compatible instruction system allows the machine to accept files from established garment nesting and marker-making software without format conversion. The 9 kW rated power covers the servo drives, vacuum pump and conveyor motor together — buyers should confirm that their existing electrical supply can accommodate the full draw including the 7.5 kW vacuum pump on a dedicated circuit.
The Cost of Skipping the Sample Cut
When a machine is specified on table size and quoted speed without a sample cut on the buyer’s actual material, the first week of production often becomes a troubleshooting period. Conveyor slip on coated fabrics, insufficient vacuum on small pieces and incorrect blade selection for the ply count all surface under real production conditions. These are configuration issues, not machine defects, but they cost production days and operator confidence. [NEED_CITE: installation delays caused by unverified material-machine configuration]
What Makes This Purchase Different from a Catalog Order
Sample cutting on the buyer’s own fabric roll at stated ply count and production speed is completed before the specification is locked. Tool head and table configuration are specified per material and production volume rather than offered as a single standard package. Voltage, plug type and control language are confirmed in writing before production begins — the 380V ±10% supply is checked against the buyer’s local standard. Software file format compatibility is tested with the buyer’s existing nesting workflow. The in-house design team covers both knife and laser cutting technologies, so the cutting method is matched to the material rather than forced into one approach.
Documentation & Verification
- Machine specification sheet listing confirmed tool head, vacuum zoning and conveyor configuration for your material
- Electrical schematic and 380V ±10% voltage confirmation matched to your local supply and plug standard
- Sample cutting report on your fabric roll at stated ply count with edge quality and piece accuracy data
- Factory test record documenting repeated accuracy verification across the 1600×2500 mm working area
- HP-GL software licence and file format compatibility note confirming import from your nesting system
Installation, Commissioning & Support
- Floor space of at least 4000×3000 mm recommended to accommodate the 3450×2300×1250 mm machine and roll loading area
- Dedicated 380V ±10% circuit rated for the full 9 kW load plus the 7.5 kW vacuum pump startup surge
- Machine ships in assembled modules with the conveyor belt and vacuum table requiring on-site alignment and calibration
- First-run commissioning includes oscillation frequency tuning and vacuum zoning adjustment on your production material
- Operator training covers HP-GL file import, marker nesting workflow, blade change procedure and conveyor tension setting
- Spare parts list includes oscillating knife blades, conveyor belt sections and vacuum seals with recommended replacement intervals
What to Prepare Before Requesting a Quote
Send your fabric type, weight per square meter, ply count and roll width so the knife head and vacuum zoning can be specified correctly. Confirm your local voltage, frequency and plug standard so the electrical system is built to match. Share a sample nesting file from your current marker-making software so HP-GL compatibility and import accuracy are verified before the order is placed.
Frequently Asked Questions
Q: How is cutting speed verified for my specific fabric?
A: The 200–800 mm/s range depends on material type, thickness and layer count. We run sample cuts on your actual fabric roll at your stated ply count and record edge quality and piece accuracy. The verified speed for your material is documented in the sample cutting report before the order is confirmed.
Q: Can the 380V system work with our local power supply?
A: The machine operates on 380V ±10%. Before production begins, we confirm your local voltage, frequency and plug standard in writing. The electrical system and wiring are built to match your facility’s supply, and this confirmation is included in the documentation package.
Q: How does the auto-feeding conveyor integrate with our spreading and sorting line?
A: The Germany-imported conveyor belt and auto-feeding system handle continuous roll-to-cut workflow. We need to know your upstream spreading equipment output rate and downstream sorting method so the conveyor speed and table indexing match your existing line throughput without creating bottlenecks.
Q: What is the smallest garment piece the vacuum table can hold reliably?
A: Hold-down reliability depends on vacuum zone size relative to your smallest pattern piece. We configure the 7.5 kW vacuum pump zoning based on your marker layout. The minimum part size that can be held flat at production speed is confirmed during the sample cutting test on your material.
Q: Which nesting and marker-making file formats does the system accept?
A: The instruction system is HP-GL compatible. Before the order, we test import of your actual nesting files to confirm format compatibility and dimensional accuracy. Any conversion requirements are identified and resolved before the machine is built, not discovered during installation.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.