Fabric Sofa CNC Cutting Machine for Fabric – Production Line
Apple Shopping Event
Hurry and get discounts up to 20% Read more
RT-D2516/RT-S2516 CNC Oscillating Knife Fabric Cutting Machine, 1600×2500mm Working Area, 7.5kW Vacuum Pump — engineered for sofa fabric production lines where tool head selection and vacuum zoning determine real edge quality on multi-layer upholstery stacks. Swiss imported oscillating knife delivers full cut, half cut and cursor location; auto-feeding conveyor integrates with HP-GL compatible nesting workflow to match your daily roll volume.
- Sample cutting on your own fabric confirms thickness capacity and edge finish before commitment
- Voltage, control language and software file format verified and documented prior to shipment
- Tool head and vacuum zone layout specified per your pattern sizes, not quoted as a generic table
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
Verified Material Compatibility — Every RT-D2516/RT-S2516 ships only after sample cutting on your actual upholstery fabric confirms edge quality and depth.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | RT-D2516/RT-S2516 |
| Product Type | CNC Oscillating Knife Fabric Cutting Machine |
| Working Area | 1600 × 2500 mm |
| Machine Size | 3450 × 2300 × 1250 mm |
| Rated Power | 9 kW |
| Vacuum Pump Power | 7.5 kW |
| Tool Head | Swiss imported oscillating knife (full cut, half cut, cursor location) |
| Translational Velocity | 800–1200 mm/s |
| Cutting Speed | 200–800 mm/s (basis to be confirmed depending on material) |
| Repeated Accuracy | ≤0.1 mm |
| Transmission System | Digital servo motor, linear guide, synchronous belt, imported ball screw |
| Servo Motor | Japanese Yaskawa |
| Guide Rail | Taiwan Hiwin |
| Conveyor Belt | Germany imported |
| Instruction System | HP-GL compatible format |
| Voltage | 380V ±10% |
| Safety Device | Infrared sensors |
| Vacuum Table | Yes, with zoning options |
| Auto Feeding | Yes |
| Standards | CE declaration where applicable |
Application Suitability
| Application | Material or Output |
|---|---|
| Sofa cover production | Multi-layer upholstery fabric, velvet, chenille, linen blends |
| Automotive interior textiles | Headliner fabric, seat cover textiles, door panel composites |
| Contract furniture | Short-run pattern variations on woven and non-woven textiles |
| Leather goods and footwear | Genuine leather, synthetic PU, sponge composite leather |
| Gasket and seal fabrication | Rubber, silicon, soft PVC, flexible non-metal sheets |
Why Generic Fabric Sofa CNC Cutting Machine Specs Hide the Real Problem
A working area number tells you nothing about how the machine handles thick velvet or multi-layer composites at production speed.
I walked into a furniture factory where a machine rated for fabric cutting sat idle because it could not push through three layers of heavy chenille without fraying the edges. The buyer had specified only table size, never testing the actual material stack. Weeks of production were lost re-cutting wasted panels. The oscillating frequency, knife geometry, and vacuum hold-down all matter when you move beyond standard cotton test swatches [NEED_CITE: common causes of edge fraying in multi-layer textile cutting]. A Fabric Sofa CNC Cutting Machine production line must prove itself on your heaviest roll before it earns a place on your floor.
Oscillating Knife Technology for Upholstery Stacks
The Swiss imported oscillating knife on the RT-D2516/RT-S2516 delivers full cut, half cut, and cursor location in a single tool head. For sofa manufacturers running nested patterns across velvet, linen, and composite materials, this means the knife can be matched to the fabric behavior rather than forcing one cutting mode across every roll. Half cut capability allows kiss-cutting on backing layers without damaging the conveyor surface, extending belt life during continuous production runs.
Vacuum Zoning That Actually Holds Small Pattern Pieces
A 7.5 kW vacuum pump paired with a zoned table addresses one of the most persistent complaints in sofa fabric cutting: small armrest and cushion panels lifting mid-cut. When vacuum is distributed across a single undivided plenum, small pieces at the table edge receive insufficient hold-down force. Configuring zones to match the nesting layout keeps every pattern segment pinned flat, maintaining the ≤0.1 mm repeated accuracy that downstream sewing operations depend on [NEED_CITE: vacuum table zoning principles for CNC flatbed cutting].
Reading the Specifications Beyond the Brochure
The Japanese Yaskawa servo motors paired with Taiwan Hiwin linear guides form a motion system built for continuous directional changes inherent in sofa pattern geometry. Curved armrest panels and irregular cushion shapes demand rapid acceleration and deceleration without losing positional accuracy. The German imported conveyor belt works with the auto-feeding system to advance roll stock between cuts, maintaining registration across successive nests. The HP-GL compatible instruction system accepts standard CAD nesting outputs, so your existing pattern library transfers without reformatting. The 9 kW rated power accounts for simultaneous operation of the oscillating knife, vacuum pump, and conveyor drive under sustained load.
The Cost of Skipping Material-Specific Configuration
When the knife oscillation frequency is mismatched to fabric density, you see it immediately in the waste bin. Thick pile fabrics like velvet and corduroy require different stroke characteristics than flat-woven synthetics. A generic setup leaves you choosing between incomplete cuts that require manual trimming or excessive blade penetration that scores the conveyor belt. Small pattern pieces for piping and welt cord details lift off the table without proper vacuum zone mapping, producing dimensional drift that shows up as misaligned seams in the sewing department [NEED_CITE: material-specific tooling requirements in textile cutting operations].
Why Production Teams Source This Configuration Here
In-house design covers both knife and laser cutting, so your fabric type dictates the method rather than the factory pushing one technology. Every tool head and table zone configuration is documented against your stated material before the order is finalized. The sample cutting report runs your actual fabric at your stated daily volume, providing cut edge photographs and cycle time data. Software compatibility is confirmed by importing your existing nesting files during the pre-order stage. Voltage, plug type, and control interface language are locked in writing before production begins, avoiding the commissioning delays that arise from mismatched electrical standards.
Documentation & Verification
- Machine specification sheet matching your confirmed tool head and table zone layout
- Electrical schematic with voltage and frequency locked to your facility supply
- Sample cutting report on your fabric at stated thickness and layer count
- Software licence and HP-GL file format compatibility confirmation
- Factory test record documenting cutting accuracy before crating
- Spare parts list identifying knife blades, vacuum seals, and belt segments
Installation, Commissioning & Support
- Floor space allocation based on 3450 × 2300 mm machine footprint plus roll stock staging area
- Dedicated 380V ±10% circuit with isolation switch rated for 9 kW continuous draw
- Assembly of conveyor section and vacuum plenum connections on arrival
- First-run parameter tuning on your fabric rolls with operator present
- Oscillating knife blade change procedure and vacuum filter maintenance schedule
- Recommended spare inventory covering blades, guide bearings, and belt sections
What to Prepare Before Requesting a Quote
Send us the specific fabric types you cut daily, including pile height and composite layer count. Confirm your standard roll width and the maximum number of layers you nest in a single cut. Provide your facility voltage and frequency along with the control language your operators require.
Frequently Asked Questions
Q: How is cutting thickness and edge quality verified on my specific fabric before order?
A: We run a sample cutting test using your actual fabric at the layer count and thickness you specify. The report documents edge quality photographs, cutting speed achieved, and any tool head adjustments made. You review and approve this report before the machine enters final assembly.
Q: What vacuum zone configuration prevents small sofa pattern pieces from lifting?
A: The 7.5 kW vacuum table is divided into zones mapped to your typical nesting layout. Small pieces like armrest panels and piping strips receive dedicated suction zones rather than relying on a single undivided plenum. Zone layout is confirmed against your pattern files before shipment.
Q: Does the software accept my existing nesting files and how is compatibility confirmed?
A: The HP-GL compatible instruction system accepts standard nesting outputs from major CAD platforms. Before order confirmation, we import a sample of your actual production files and run them through the control system to verify path execution, registration, and output format.
Q: How do I match auto-feeding speed to my daily fabric roll volume?
A: The German imported conveyor belt and auto-feeding system are calibrated to your stated daily throughput during the sample cutting phase. Feed speed, cut cycle time, and roll change intervals are documented so you can verify the workflow meets your production schedule before committing.
Q: What documentation ships with the machine for installation and maintenance?
A: The machine ships with an operation manual in your confirmed language, electrical schematic, spare parts list, software licence note, and the factory test record. The sample cutting report from your material test is included as the baseline reference for parameter settings.
Customer Reviews
Related Products
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.
商品评价
Clear filtersThere are no reviews yet.