Paper Board Die Cutting Machine 100m/min 11kW | for Packaging

Swiss Knife Precision — The multifunctional oscillating head integrates full-cut, half-cut and cursor location to handle corrugated board, greyboard and sticker stock on a single 1600×2500mm bed without retooling.

Technical Specifications

Application Suitability

Why Board Grade Matters More Than the Brochure Thickness Claim

A Packaging CNC Cutting Machine production line rated at "up to 100 mm cutting thickness" may still stall on a dense 3 mm greyboard if the oscillating frequency and knife geometry are mismatched to the fibre density. Tool head configuration and vacuum zoning must be verified against the buyer’s actual board grade and flute profile before the order is placed.

I have watched carton sample machines jam mid-run because the supplier quoted cutting depth based on soft E-flute corrugated, then the buyer loaded B-flute double-wall at the same speed setting. The knife deflected, the vacuum zone could not hold the sheet edge, and the entire sample batch was scrapped. That downtime falls on the production floor, not the quotation [NEED_CITE: material-specific cutting parameters for corrugated and greyboard grades]. Matching the oscillating knife stroke and the vacuum table adsorption zone to each board type prevents these stoppages from occurring in the first place.

Tool Head Selection for Mixed Packaging Substrates

The Swiss imported multifunctional head on the RT-D2516/RT-S2516 combines vibration full cutting, half cutting and cursor location in one unit, which matters when a Packaging CNC Cutting Machine production line must switch between creasing a gift box hinge and kiss-cutting a sticker sheet on the same shift. Drag knife, creasing wheel and oscillating knife each address a distinct failure mode: ragged edges on thick board, incomplete score lines on folding carton, and delaminated sticker release paper. Specifying the right combination before build avoids the mid-job tool swap that erodes throughput on short-run packaging work.

Vacuum Zoning and Small Part Hold-Down

Honeycomb aluminum vacuum tables on the RT-D2516/RT-S2516 distribute suction across the 1600×2500 mm bed, yet small carton flaps and narrow sticker strips can still lift if the active zone is wider than the part footprint. Zoned adsorption follows the cutting head so that suction concentrates where the knife is working rather than bleeding across unused table area [NEED_CITE: vacuum hold-down principles for flatbed digital cutting tables]. This is particularly relevant for packaging sample makers running nested layouts with mixed part sizes, where an unsecured edge leads to knife deflection and scrapped material.

Reading the Specs Beyond Working Area

The 9 kW rated power covers the oscillating knife drive, servo motors, and control electronics, while the separate 7.5 kW vacuum pump operates on its own circuit; buyers should confirm that their facility can supply both simultaneously without voltage sag. Taiwan Delta servos paired with Hiwin linear guides deliver ≤0.1 mm repeatability, which directly affects crease alignment on multi-panel carton designs where a 0.3 mm drift across a 2500 mm sheet throws off the folded assembly. Cutting speed ranges from 200 to 800 mm/s depending on material, meaning the same machine will run sticker contour jobs noticeably faster than dense greyboard scoring. HP-GL compatible instruction format ensures the nesting software imports standard vector files without forcing the buyer to rebuild artwork from scratch.

What Happens When the Wrong Configuration Ships

When a vacuum zone layout is designed for large-format signage instead of carton sample work, small packaging parts lift during high-speed passes, producing ragged edges and forcing the operator to reduce feed rate to compensate. Wrong creasing wheel diameter on thick greyboard cracks the outer liner rather than producing a clean fold line. Voltage mismatch between the 380V±10 machine and a 220V workshop supply can cause servo driver faults that appear only after several hours of continuous operation, making the failure difficult to diagnose on site [NEED_CITE: electrical compatibility issues in cross-border machinery installation]. These issues are avoidable when tool head and table configuration are documented per material before production begins.

Why Buyers Source This Machine Here

In-house design covers both oscillating knife and laser cutting platforms, so a packaging converter can match cutting method to substrate rather than forcing cardboard through a laser or sticker vinyl through a router. Tool head and table configuration is specified per board grade and daily volume, not left as a generic default. CCD camera positioning supports printed contour work for sticker and label jobs where registration to pre-printed marks is necessary. Software compatibility and UI language are confirmed before the order ships, not discovered during commissioning. Sample cutting runs on the buyer’s own board stock before commitment, providing a physical record of edge quality and crease depth on the exact material that will run in production.

Documentation & Verification

• Machine specification sheet listing knife type, creasing wheel diameter and vacuum zone map per material
• Electrical schematic confirming 380V±10% wiring, plug type and dedicated vacuum pump circuit
• Sample cutting report on buyer’s own corrugated or greyboard stock with edge and crease photographs
• Professional carton nesting software licence with file format compatibility note and UI language record
• Factory test record documenting repeatability and cutting speed on specified board grades before dispatch

Installation, Commissioning & Support

• 3450×2300 mm machine footprint requires level concrete floor with clearance for conveyor belt feed and sheet loading
• Dedicated 380V±10% circuit for 9 kW machine power plus separate run for 7.5 kW vacuum pump
• Machine ships as single frame with high-temperature-treated welded steel base; vacuum table mounts on site
• First-run parameter setting includes oscillation frequency, vacuum zone mapping and cutting speed per board grade
• Operator training covers tool head swap between oscillating knife, creasing wheel and drag knife
• Spare parts list specifies Swiss knife blades, creasing wheels and conveyor belt sections for initial inventory

Before You Send the Inquiry

Provide the board grades and thicknesses you run daily, including flute profile for corrugated and GSM for carton stock, so the oscillating knife stroke and vacuum zone layout can be configured to match. Confirm your workshop voltage, frequency and plug type, along with the preferred control software language, to avoid electrical or interface surprises at commissioning. If you currently use a specific CAD or nesting workflow, share the file format so compatibility can be verified before build.

Frequently Asked Questions

Q: How is cutting thickness verified against my specific board grade?
A: We run sample cuts on your actual corrugated, greyboard or sticker stock before order confirmation, documenting edge quality, crease depth and cutting speed for each material. This physical test reveals how fibre density and flute profile interact with the oscillating knife stroke, which a generic thickness rating cannot predict.

Q: Which tool heads should I configure for carton and sticker work?
A: Oscillating knife handles full and half cutting on board, a creasing wheel produces clean fold lines on greyboard, and a drag knife suits thin sticker contour work. The multifunctional head on the RT-D2516/RT-S2516 integrates these functions, and the final combination is specified based on your material mix and sample test results.

Q: Will the vacuum table hold small carton parts during high-speed cutting?
A: The aluminum honeycomb table uses zoned adsorption that concentrates suction around the active cutting area. Zone layout is configured to match your typical nesting pattern, and sample cutting verifies that small flaps and narrow strips remain flat without manual intervention.

Q: Does the nesting software work with my existing CAD files?
A: The professional carton nesting software supports HP-GL compatible format and multi-format vector import. We confirm file compatibility and UI language before shipment, and provide a format test report so you can verify workflow integration without waiting for machine arrival.

Q: How are voltage and plug type confirmed for my market?
A: The RT-D2516/RT-S2516 operates at 380V±10%. Before production we document your facility voltage, frequency and plug standard on the electrical schematic, and include a dedicated circuit plan for the separate 7.5 kW vacuum pump to prevent overloading during simultaneous operation.