Cloth CNC Cutting Machine 1625 for Fabric – Production Line

Workflow integration — the machine’s control system accepts PLT, DXF, AI and PDF natively so the cutting program slots into existing nesting software rather than forcing a new workflow.

Technical Specifications

Application Suitability

Why File Format Compatibility Decide Whether the Line Runs

If the software cannot import your existing DXF or PLT markers, the cutting table becomes a bottleneck before the first blade drops.

Many fabric producers discover after installation that their nesting files from the CAD department do not open directly on the machine console. Operators end up re-drawing patterns manually or converting files through a third-party tool, which introduces errors in piece count and grain direction. This CNC Oscillating Knife Cutting Machine production line reads PLT, DXF, AI and PDF natively on the PLC panel, meaning the files your pattern makers already produce move straight to the cutting bed without an extra translation step [NEED_CITE: CAD file format interoperability in garment manufacturing].

Matching the Blade to the Fabric, Not the Brochure

Every fabric behaves differently under a blade. A woven suit wool demands a high-frequency oscillating knife to keep the plies aligned, while a knitted automotive seat cover tends to stretch and shift unless a driven rotary tool or pneumatic knife is used. The 1625 platform carries seven tool head options that are specified against the buyer’s actual sample material before the order is confirmed. Running the wrong tool on a coated textile produces frayed edges and ply shift that no amount of operator adjustment can fix mid-shift.

Holding Small Parts Flat When the Vacuum Zoning Matters

A 9 kW vacuum pump pulls air through the aluminum honeycomb table, but suction only works if the zones match the piece geometry. When cutting dozens of small gusset or collar pieces from a single spread, an undivided table loses grip on the tail end of the lay, and the bottom plies lift into the blade path. The zoning layout on this CNC Oscillating Knife Cutting Machine production line is configured during the specification stage based on the buyer’s typical marker layout, so the sections under the smallest pattern pieces stay locked through the entire cut cycle [NEED_CITE: vacuum hold-down principles in flatbed digital cutting].

Reading the Specs That Actually Affect Your Daily Output

The ±0.1 mm repeat positioning accuracy is not a laboratory figure; it determines whether a striped or checked fabric can be cut with the pattern aligned across multiple plies. In suit jacket production, a front panel and a pocket flap must carry the same stripe register, and even a fraction of a millimeter drift over a 1600 mm sweep shows up on the finished garment. The 0–2000 mm/s speed range must be read alongside cutting thickness: a 30 mm stack of upholstery foam cannot be traversed at the top speed without compressing the bottom plies, while a single ply of lace can run near the upper limit with minimal blade load. The 1625 machine dimensions (3300×2100×1350 mm) define the floor footprint you need to reserve, which is wider than the working area because of the gantry overtravel and the operator access path on the long side. Voltage options at 110V, 220V and 380V must be confirmed against the factory supply before the electrical cabinet is wired, because rewiring a PLC and servo drives on arrival adds days to commissioning.

What Happens When the Configuration Is Chosen From a Catalogue Instead of a Sample

I once spent three days in a Bangladeshi plant where a cloth CNC cutting machine had been ordered on working area alone. The buyer’s daily production involved a coated automotive seat fabric that a standard oscillating knife could not penetrate cleanly; the coating gummed the blade and the vacuum table lost grip on the slick underside, so the bottom plies shifted and the cut panels were rejected. Production dropped roughly by half until a driven rotary tool and a different zone map were fitted. That outcome is avoidable when the sample cutting report on the buyer’s own material is reviewed before the purchase order is signed [NEED_CITE: material-specific tooling selection in textile cutting operations].

Why Production Managers Source This Machine Here

The 1625 is built by a manufacturer that covers both knife and laser cutting under one roof, which means the cutting method is matched to the material rather than forced into whichever technology happens to be on offer. Tool heads and vacuum table zoning are specified against the buyer’s fabric samples and daily volume, not pulled from a standard price list. CCD camera contour recognition is available for printed fabrics that need the blade to follow a registered mark, which matters for sublimated sportswear and automotive trim. Software and file format compatibility are confirmed in writing before production starts, so there is no guesswork when the machine arrives on the floor. Sample cutting on the buyer’s own material is a standard step, providing a physical report that documents edge quality and achievable thickness before commitment.

Documentation & Verification

• Machine specification sheet detailing 1600×2500 mm working area and selected tool heads
• Electrical schematic confirming voltage and frequency for your factory supply
• Tool head and vacuum table configuration list matched to your fabric samples
• Sample cutting report produced on your own material before shipment
• Software licence and file format compatibility note covering PLT, DXF, AI and PDF
• Factory test record showing repeat accuracy and safety device function

Installation, Commissioning & Support

• Floor space of 3300×2100 mm plus operator clearance and material feed path on both long sides
• Dedicated circuit matching confirmed voltage option (110V, 220V or 380V) with correct frequency
• Gantry and PLC panel arrive assembled; vacuum pump and table leveled on site
• First-run parameter tuning against your fabric type, layer count and marker layout
• Operator training on PLT/DXF/AI/PDF import and tool head changeover
• Spare oscillating and rotary blades plus vacuum cups supplied for initial production period

What We Need to Quote the Right Configuration

Send the fabric types you run most often, including any coated or laminated variants, along with the typical ply count or single-ply thickness. Let us know your daily cutting volume in pieces or layers and the shift pattern. Confirm the voltage and frequency available at the installation point, the preferred control language, and whether your existing nesting software outputs PLT, DXF, AI or PDF. If you have upstream spreading equipment or downstream sorting conveyors, share their cycle times so the table configuration matches the line rhythm.

Frequently Asked Questions

Q: How do we verify the cutting speed on our actual fabric before placing the order?
A: We run a sample cutting test on the material you send us, using the tool head and layer count you specify. The sample cutting report documents edge quality, ply shift observation and achievable speed range. You receive physical cut pieces and a written record before any order commitment, so the capacity claim is tied to your fabric, not a generic reference material.

Q: Our nesting software exports AI and DXF. Will the control panel import both without a converter?
A: The PLC control panel accepts PLT, DXF, AI and PDF directly. We confirm file compatibility by exchanging sample markers during the specification stage. If your CAD system uses a variant or version outside the supported range, the software licence and file format compatibility note identifies the gap and any required export setting before the machine ships.

Q: How is the vacuum table zoned for small pattern pieces like collars and cuffs?
A: Zone layout is configured based on your typical marker. We review a sample nesting file and map the table sections so that small parts fall over active suction zones. The 9 kW pump capacity is then matched to the open area, ensuring hold-down force is sufficient even when most of the table surface is covered by large panels.

Q: What happens if our daily production includes both woven suit fabric and coated automotive material?
A: The 1625 accepts multiple tool heads on one gantry, so an oscillating knife for the woven fabric and a driven rotary or pneumatic knife for the coated material can share the same table. Tool head selection is finalized during the sample cutting stage, and changeover procedure is covered in operator training.