Shop
CNC Honeycomb Board Cutting Machine Production Line Workflow
RT-D2516/RT-S2516 CNC Digital Cutting Machine, 1600×2500mm, 9kW — configured for honeycomb board and corrugated packaging production with oscillating knife, creasing wheel and V-cutting tool heads.
- Multi-tool setup cuts, creases and slots in one pass, matched to flute profile and board thickness up to 100mm
- Magnesium-aluminum vacuum table with zone control holds small carton parts flat at 800–2000mm/s traverse speed
- CCD and panoramic vision positioning for accurate contour cutting on pre-printed packaging stock
Sample cutting on your own honeycomb board grade is completed before order commitment to verify tool head selection, edge quality and vacuum zoning against your actual production files.
CNC Knife Cutting Machine 2026 Cardboard Roll Cutter
$395,617.20Product Introduction
CNC Knife Cutting Machine 2026 is designed for cardboard box and roll cutting, ideal for flexible material processing with precision and efficiency, suitable for industrial production needs.
Key Specifications
| Application | Cardboard Box & Roll Cutting |
| Type | CNC Knife Cutting Machine |
| Year | 2026 Model |
| Material | Flexible Materials |
CNC Knife Cutting Machine 2026 Cardboard Roll Cutter – for Packaging
RT-D2516/RT-S2516 CNC Packaging Sample Cutting Machine, 1600×2500mm, Oscillating Knife — configured for corrugated and folding carton prototyping with full cut, crease half cut and cursor positioning in a single head.
- Flatbed vacuum table with 7.5 kW pump secures small die-line parts during cutting
- Repeatability ≤0.1 mm ensures accurate crease-to-cut alignment across sample runs
- Servo-driven motion via Yaskawa motors and Hiwin linear rails for consistent edge quality
Sample cutting on your own cardboard grade is available before commitment, with tool head configuration and software compatibility confirmed to match your workflow.
CNC Knife Cutting Machine for Car Mat Film V-Cut – Automotive
1625 CNC Oscillating Knife Cutting Machine, 1600×2500 mm, 9 kW Vacuum — configured for fabric, leather and composite workflows.
- Tool heads matched to material: oscillating knife, driven rotary, V-groove and kiss cutting options
- Aluminum bellows vacuum table with zoning to prevent small-part lift at speed
- CCD-ready contour workflow with DXF/PLT/AI/PDF import and intelligent nesting
Sample cutting on buyer’s own material with edge quality and cycle time documented before commitment.
CNC Knife Cutting Machine for Cardboard Crafts & Boxes – Industrial Application
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm, 9kW, 7.5kW Vacuum Pump — built for carton sample making, fabric nesting and gasket cutting in one flatbed platform.
- Multi-tool head selection (oscillating knife, drag knife, creasing wheel, V-cut) matched to material thickness and edge quality requirement
- CCD camera positioning and panoramic recognition maintain contour accuracy at production speed
- Zoned vacuum adsorption table with PVDF coating holds small parts securely during cutting
Each unit ships with a sample cutting report on your material, electrical schematic confirmed to target voltage, and a configuration list matched to your production workflow.
CNC Knife Cutting Machine for Cardboard Roll – Industrial Application
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm, 11kW — configured for packaging sample making with multifunctional Swiss blade head delivering full and half cuts on corrugated and solid board.
- Yaskawa servo and Hiwin linear guide ensure ≤0.1mm repeatability across the flatbed vacuum table
- HP-GL compatible workflow integrates with standard packaging CAD for fast die-line prototyping
- 7.5kW vacuum pump holds porous cardboard flat during high-speed cutting at 200–800mm/s
Buyers receive sample cutting reports on their own board grade before commitment, with vacuum zoning verified against the smallest part in the production mix.
CNC Knife Cutting Machine for Fabric Leather PVC – Industrial Application
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500 mm, ≤100 mm Cutting Thickness — configured for fabric, leather and composite production with tool head selection, vacuum table zoning and CCD contour recognition matched to your specific material and daily output.
- Swiss imported multifunctional knife for full cutting, half cutting and cursor location
- Magnesium-aluminum alloy vacuum table with PVDF coating for uniform hold-down
- CCD mark point and panoramic camera positioning for printed contour jobs
Sample cutting on your own material provided before commitment to verify edge quality and speed.
CNC Knife Cutting Machine for Label – Industrial Application
RTT-6080/6080 Pro CNC Digital Label Cutting Plotter, 600×800mm, CCD Camera — purpose-built for short-run label converters and packaging sample makers.
- Dedicated kiss cutting tool slices face stock cleanly without damaging the liner, while the CCD camera tracks printed marks for accurate contour cutting.
- The Pro model adds a high-speed oscillating knife for thicker label stock and foam tapes up to 5mm.
Sample cutting on your own label material is completed before commitment, with software compatibility and voltage confirmed to match your workflow.
CNC Knife Cutting Machine for Leather Automatic – Turnkey Solution
RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm, 9kW — configured for leather, fabric and composite production workflows. Features panoramic vision recognition for irregular contour extraction and flaw identification, Swiss oscillating knife tool head with full/half cutting, and Germany imported auto-feeding conveyor with 7.5kW vacuum pump delivering ≤0.1mm repeatability at 800–1200mm/s translational velocity.
Cutting method and tool head configuration specified per material type, thickness and daily volume. Sample cutting on buyer’s own material provided before commitment, with electrical schematic, voltage confirmation and software file format compatibility documented prior to shipment.
CNC Knife Cutting Machine for Packaging Sample – Compact
RTT4060 / RTT4060 Pro CNC Knife Cutting Machine, 400×600mm working area, CCD contour recognition — configured with oscillating knife, drag knife and creasing tools matched to your stock type and thickness for clean-edge sample making.
- Designed for packaging prototyping and small-format label producers who need accurate contour cuts on printed material at production speed, with DXF/AI/PDF import and 0.05mm positioning accuracy
- Tool head and vacuum table zoning specified per material so small parts stay flat and edges remain crush-free
Sample cutting on your own material, with a full test report covering edge quality and contour registration, available before you commit.
CNC Knife Cutting Machine for Paper & Corrugated – for Packaging
CLD2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm, 6.6kW — configured for corrugated, cardboard and sticker contour cutting with zoned vacuum adsorption and multifunctional tool head supporting full cut, kiss cut and creasing.
- Delta servo drives with Hiwin linear guides deliver ≤0.1mm repeatability across the working area
- CCD camera positioning and carton nesting software included, DXF/PLT file import confirmed before order
Sample cutting on your own corrugated or sticker stock verifies cut depth, crease quality and edge finish at production speed before commitment.
CNC Knife Cutting Machine for PET Panels – Industrial Application
- Sample cutting on your own composite material confirms tool head and cutting depth suitability before commitment.
