CNC Cardboard Cutting Table RT–R2513 – Production Line

Multi-Tool Head Integration — one setup cuts, creases and perforates corrugated and paperboard in a single pass, eliminating the need to swap dies between sample and short-run jobs.

Technical Specifications

Application Suitability

Why Board Thickness Alone Is Not Enough to Specify a CNC Carton Cutting Table Production Line Workflow

The right tool head and vacuum zoning must match the flute profile, not just the sheet thickness.

I have walked into packaging sample rooms where the cutting table was chosen by working area only. The board fed flat, but the oscillating knife crushed the E-flute core on the first pass, leaving a ragged edge that no amount of parameter tweaking could clean up. When a production line handles anything from single-face corrugated to 18mm honeycomb board, the cutting depth is only half the equation — the creasing wheel diameter, the vacuum zone count and the hold-down pressure during kiss-cutting all shift with each board grade [NEED_CITE: corrugated flute profiles and tooling compatibility standards].

Matching the Tool Head to the Flute

The RT–R2513, RT-D2516 and RT-S2516 each carry up to four tool positions — oscillating knife, creasing wheel, kiss-cut knife and round punch — in a single head assembly. For a packaging sample room turning around prototypes same-day, this means one file drives the full cut-crease-perforate sequence without manual die changes. The oscillating knife handles straight and curved cuts through corrugated up to 18mm, while the creasing wheel scores fold lines without crushing the flute structure underneath.

Vacuum Zoning Holds Small Blanks Flat

An aluminum alloy honeycomb platform with zoned vacuum adsorption keeps nested carton blanks locked in place even when the cutting path releases internal tension. On a 1600×2500mm table running mixed layouts of small gift boxes and large mailer cartons, selective zone activation prevents small parts from lifting mid-cut [NEED_CITE: vacuum hold-down requirements for nested corrugated layouts]. The 7.5 kW vacuum pump maintains consistent suction across active zones without requiring the operator to cover unused areas with scrap board.

Frame Rigidity Under Continuous Creasing Pressure

The welded steel frame undergoes high-temperature stress relief before assembly. Creasing thick corrugated board generates sustained lateral force on the gantry; a frame that has not been stress-relieved will drift over months of production, pushing repeated accuracy outside the <0.05mm tolerance. Taiwan Hiwin guide rails and Dongling servo motors (Delta servos available as an alternative) keep the head path consistent across the full working area, whether cutting a single sample or running a nested sheet of forty carton blanks.

Reading the Specs That Actually Matter for Your Board

The 9 kW rated power covers the spindle, vacuum pump and servo load simultaneously — important when the table runs both cutting and creasing in one pass. Software imports DXF, OLT, PDF and AI files directly, so a sample room can take artwork from any common packaging CAD package without re-drawing. The Ethernet transmission port handles large nested files faster than legacy serial connections, reducing the gap between design approval and first cut. Voltage is listed at 380V, but the target market frequency — 50 Hz or 60 Hz — must be confirmed before the electrical cabinet is wired [NEED_CITE: voltage and frequency standards by export market].

What Happens When the Wrong Configuration Ships

A creasing wheel specified for B-flute pressed into E-flute board will split the liner rather than score it, leaving a visible crack on the printed surface. If the vacuum zones are too wide for the blank size, small carton panels lift during the final cut and the oscillating knife catches the edge, producing a torn corner that fails the sample approval. These problems surface on day one of production, not during the factory acceptance test on standard grey board [NEED_CITE: common corrugated cutting defects from tool mismatch].

Why Buyers Source This Range from REALTOP

In-house design covers both knife cutting and table engineering, so the tool head configuration is matched to the buyer’s board grade rather than offered as a generic package. Every order starts with sample cutting on the buyer’s actual corrugated stock, producing a report that documents edge quality, crease definition and recommended parameters before the machine enters production. Voltage, plug type and control interface language are confirmed at the order stage — not assumed. The carton nesting software ships with a perpetual licence and file format compatibility note, so the buyer knows which CAD exports will open without conversion. CE documentation is provided where applicable to the destination market.

Documentation & Verification

• Sample cutting report on buyer’s own corrugated board grade and flute type
• Tool head and vacuum zone configuration list matched to target board format
• Electrical schematic with confirmed voltage and frequency for destination market
• Software licence key and file format compatibility note for DXF, OLT, PDF, AI
• Factory test record with cutting speed and accuracy data on buyer-supplied material
• Packing photographs showing table surface and head assembly condition before crating

Installation, Commissioning & Support

• 380V dedicated circuit required; confirm 50 Hz or 60 Hz with local supply before cabinet wiring
• RT–R2513 footprint requires minimum 4000×2500mm clear floor area including operator access
• Aluminum honeycomb table ships flat; vacuum pump connects on-site to reduce transit damage risk
• First-run calibration includes vacuum zone mapping and creasing wheel pressure setting on buyer’s board
• Ten oscillating blades included; reorder cycle depends on board abrasiveness and daily cut length
• One-year warranty covers servo, rails and electronics; felt and blades are consumables

Before You Request a Quote

Share the specific board grades you run — flute type, GSM, thickness and whether the stock is single or double wall. Let us know your typical sheet size and the daily volume of samples or short-run cartons so the working area and auto-feed option can be sized correctly. Confirm the local voltage and frequency at the installation site, along with the preferred control language for the operator interface.

Frequently Asked Questions

Q: How do I match the creasing wheel to different corrugated flute profiles?
A: E-flute and B-flute require different wheel diameters and pressure settings to score without splitting the liner. The tool head on the RT–R2513, RT-D2516 and RT-S2516 accepts multiple creasing wheels, and the correct size is specified during sample cutting on your board stock before the machine ships.

Q: Will the vacuum table hold small carton blanks without lifting?
A: The aluminum honeycomb platform uses zoned adsorption, so active vacuum is concentrated under the nested layout. This keeps small blanks — such as cosmetic box inserts or label panels — flat during cutting without requiring the operator to mask unused table area with scrap material.

Q: Is the nesting software compatible with our existing packaging CAD files?
A: The software imports DXF, OLT, PDF and AI formats directly. A file format compatibility note ships with the machine so your design team knows which export settings produce clean toolpaths without manual cleanup.

Q: What electrical preparation is needed before the table arrives?
A: The system requires a 380V supply with a dedicated circuit rated for 9 kW total load. The target market frequency — 50 Hz or 60 Hz — must be confirmed at the order stage so the electrical cabinet and servo drives are configured correctly before dispatch.