Corrugated Carton Cutting Machine 1625 | Manufacturer

Tool Head Specification per Flute — oscillating knife, creasing wheel and kiss-cut tools matched to your exact corrugated board before shipment, verified on your stock with a sample cutting report.

Technical Specifications

Application Suitability

Why Tool Head Selection Determines the Cut Quality of Your CNC Carton Cutting Machine for Packaging Sample Making

Specifying a flatbed cutter by working area alone leaves the most critical variable unaddressed: which tool head actually touches your board.

In sample rooms and short-run packaging shops, I have watched machines struggle because the oscillating knife frequency was set for thin art paper while the operator was running double-wall BC-flute. The blade chattered through the top liner, left the corrugated medium crushed at the fold line, and produced creasing marks that cracked when folded. The fix is never software — it starts with matching the tool head to the ply count, flute profile and board density on the buyer’s actual stock [NEED_CITE:corrugated flute profiles and corresponding cutting parameters].

Tool Head Array Matched to Board Profile

A packaging sample table must switch between full cut, kiss cut and creasing within the same job. The interchangeable tool head array on this CNC carton cutting machine for packaging sample making — oscillating knife, creasing wheel, kiss cutting tool, V groove knife and driven rotary knife — allows each operation to use the purpose-built implement rather than forcing one blade through every task. Creasing pressure, knife oscillation frequency and kiss-cut depth are all set independently per tool, so a B-flute carton and an EVA foam insert can each receive the correct treatment.

Vacuum Holding Across the Full 1600 × 2500 Surface

The aluminum bellows vacuum table is designed to maintain flat holding force over the entire working area. Small carton blanks and thin foam offcuts tend to lift at the edges when vacuum zoning is insufficient, causing the knife to drag and the cut line to wander. A well-zoned table with high flatness keeps E-flute sheets and multi-ply greyboard pinned during high-speed passes, which directly affects the ±0.1 mm cutting accuracy the machine is rated for [NEED_CITE:flatbed vacuum table zoning and small-part holding in digital cutting].

Reading the Specification Sheet for Your Production Environment

Cutting thickness up to 40 mm appears on the spec sheet, but that figure changes with flute type and board density — a single-wall E-flute sheet at 1.5 mm behaves very differently from a laminated BC-flute board at 8 mm. The 9 kW vacuum pump provides suction force across the aluminum table; shops running porous corrugated stock should confirm that the pump capacity covers their thickest board before committing. The PLC control panel with dedicated packaging box structure design software integrates directly with the supported file formats — PLT, DXF, AI and PDF — so existing design workflows can import without format conversion. Voltage options of 110V, 220V and 380V must be confirmed alongside the local frequency before the machine ships, because a 50 Hz pump wired for 60 Hz will underperform from day one.

What Happens When Configuration Is Skipped

I once received a call from a sample room that had ordered a flatbed cutter specifying only the working area. They ran 3 mm greyboard for rigid box prototypes, but the machine shipped with a standard oscillating knife calibrated for thinner carton stock. The knife deflected on dense greyboard layers, leaving ragged edges that required hand-trimming on every piece — eliminating the time saving they had invested in. The creasing wheel pressure was also too light for their board weight, producing fold lines that cracked under bending rather than folding cleanly [NEED_CITE:tool head and creasing pressure mismatch on dense packaging board].

Why Sourcing This Cutter from Jinan Matters

The machine is designed and built in-house, covering the knife cutting technology end-to-end rather than assembled from third-party components. Tool head and table configuration is specified per material and production volume before the order is placed, not after delivery. CCD camera positioning can be discussed for printed contour work if your packaging line includes pre-printed carton stock. Software compatibility is confirmed during the inquiry stage, so your existing DXF and AI files are verified before production begins. Sample cutting on your own corrugated board, foam or greyboard stock is completed and documented before you commit to the purchase.

Documentation & Verification

• Machine specification sheet listing every tool head and option shipped with your unit
• Electrical schematic and voltage confirmation matched to your facility supply
• Tool head and table configuration list detailing knife type, creasing wheel and vacuum zoning
• Sample cutting report on your corrugated board or foam stock with edge quality documented
• CE declaration with scope covering this machine class where applicable
• Software licence and file format compatibility note for PLT, DXF, AI and PDF import

Installation, Commissioning & Support

• Floor space for the 3300 × 2100 mm footprint plus operator clearance and sheet feed access
• Dedicated electrical circuit matching confirmed voltage — 110V, 220V or 380V — with frequency verified
• Machine arrives on heavy-duty frame; leveling and vacuum table seal check at commissioning
• First-run parameter setup for your specific flute type, board density and foam thickness
• Operator training on tool head changeover, PLC language selection and nesting workflow
• Spare parts list covering oscillating knife blades, creasing wheels and vacuum table seals

What We Need from Your Inquiry

Send the exact material types you plan to cut — corrugated flute profile, greyboard weight, foam type and thickness — along with your largest sheet size and daily sample volume. Confirm your facility voltage, frequency and preferred control panel language. If your current workflow relies on specific DXF or AI file structures, share a sample file so we can verify software import compatibility before quoting. Requesting sample cutting on your own stock is always encouraged.

Frequently Asked Questions

Q: How is cutting thickness verified for my specific flute type and board density?
A: We run your actual corrugated board or greyboard on the machine before the order is finalized. The sample cutting report documents edge quality, creasing depth and any tool head adjustments made, so the 40 mm maximum is validated against your real material rather than a generic lab sample.

Q: Which tool head is recommended for creasing versus full cut on my corrugated stock?
A: Creasing uses a dedicated wheel with adjustable pressure, while full cut relies on the oscillating knife tuned to your flute profile. The configuration list shipped with your machine specifies exactly which tools are included for your material range, confirmed during the sample cutting stage.

Q: Is voltage, plug type and control language confirmed before shipment?
A: Yes. The electrical schematic and voltage confirmation document is prepared based on your facility supply details collected during the inquiry. Control panel language — English, Russian, Italian, Chinese or a custom option — is set and verified before the machine leaves the factory.

Q: Can the software import my existing packaging design files and nesting workflow?
A: The dedicated packaging box structure design software supports PLT, DXF, AI and PDF formats. We verify compatibility with your specific files during the pre-order stage, so you know your nesting workflow transfers correctly before the machine is built.

Q: Is sample cutting on my own material available before order commitment?
A: Yes. You send your corrugated cardboard, foam or greyboard stock, and we run it on the machine with the proposed tool head configuration. The resulting sample cutting report with edge quality and creasing documentation is shared before you proceed to order.