Packaging CNC Cutting Machine 1625 | Industrial Application

Tool head configuration matched to substrate — every packaging CNC cutting workflow depends on pairing the right knife, creasing wheel or milling tool to the actual board grade before the first cut is made.

Technical Specifications

Application Suitability

What "Maximum Cutting Thickness" Does Not Tell You About Corrugated Board

A 40 mm depth rating means nothing if the wrong tool head is mounted on the carriage.

I once watched a packaging sample shop run five-layer double-wall corrugated on a table spec’d only for three-layer board. The oscillating knife stalled mid-sheet, leaving ragged flutes and crushed edges across an entire batch of carton samples. The machine was not defective; it was simply misconfigured for the substrate. When sourcing a corrugated box sampling plotter production line, the first conversation should always be about flute type, board ply count and the tool head that matches them — not just the number on the spec sheet. [NEED_CITE: corrugated flute classification and tooling requirements for digital cutting]

Tool Head Selection Across Packaging Substrates

The 1625 table supports seven interchangeable tool heads, covering the full range of packaging sample making. An oscillating knife handles straight and contour cutting through corrugated and solid board. A driven rotary knife suits continuous fabric and non-woven liner runs. The creasing wheel scores fold lines without piercing the top liner — essential for clean carton folds. For industrial inserts, a V groove knife cuts chamfered channels in EVA and foam.

Vacuum Zoning and Small-Part Hold-Down

The aluminum bellows vacuum platform delivers full-surface adsorption across the 1600×2500 mm bed. In packaging sample making, small die-cut shapes and narrow carton flaps are prone to lifting once the knife completes a closed contour. A 9 kW vacuum pump maintains consistent suction, keeping thin cardboard and light foam board flat throughout the cut cycle. Proper zoning prevents lift without requiring additional mechanical fixturing. [NEED_CITE: vacuum table zoning principles for flatbed digital cutters]

Specs That Shape the Packaging CNC Cutting Workflow

The ±0.1 mm positioning accuracy matters most when nesting multiple carton blanks on a single sheet — tighter tolerances reduce material waste and allow tighter nesting gaps. The 0–1500 mm/s cutting speed range provides flexibility: slower feed on thick double-wall corrugated protects flute integrity, while faster passes on thin folding carton stock keep sample turnaround competitive. The included packaging box structure design software accepts PLT, DXF, AI and PDF files, removing the need to re-draw box structures in a proprietary format. Servo drive options across Panasonic, Delta and Dorna give buyers flexibility to align with local service availability and spare parts supply chains.

The Cost of Skipping a Material Trial Run

Buying on working area alone is the most common mistake in packaging equipment procurement. A table that cuts clean single-wall corrugated may crush five-layer board if the oscillating frequency and knife stroke are not adjusted for the thicker substrate. I have seen sample shops discard entire short runs because the kiss-cutting tool penetrated too deep, scoring the release liner beneath the label stock. Requesting a sample cutting report on the buyer’s own material before purchase is the only reliable way to confirm edge quality and achievable depth. [NEED_CITE: material trial requirements before digital cutting equipment commitment]

Why Source This Equipment Here

In-house design covers both knife cutting and supporting automation, so the packaging CNC cutting workflow is built around substrate requirements rather than forced into a single method. Tool head and vacuum table configuration is specified per material grade and production volume, not selected from a fixed catalogue. Software compatibility with the buyer’s existing CAD and nesting files is confirmed before the order is finalized. Voltage, plug type and control language are aligned with the destination factory before shipment. Sample cutting on the buyer’s own corrugated, foam or insert material validates the configuration before commitment.

Documentation & Verification

• Machine specification sheet listing all seven tool head options and compatible substrates
• Electrical schematic with voltage and frequency confirmation for the destination market
• Sample cutting report on the buyer’s own corrugated or foam board grade
• Software licence and file format compatibility note for PLT, DXF, AI and PDF workflows
• Factory test record documenting positioning accuracy and vacuum hold-down performance

Installation, Commissioning & Support

• Foundation must support 3300×2100×1350 mm footprint with level tolerance for the vacuum platform
• Dedicated circuit required for the 9 kW vacuum pump separate from the PLC control supply
• Table ships partially assembled; vacuum bed and gantry require on-site alignment
• First-run parameter setting includes oscillating frequency calibration for the buyer’s board grade
• Spare oscillating knife blades, creasing wheels and vacuum seals included in the initial kit

Request a Configuration Recommendation

Before requesting a quote, share the corrugated flute types and board thicknesses you process most often, along with daily sample volume and the file formats your design team currently uses. If your factory runs a specific voltage standard or requires control panel text in a language outside the default options, note that as well so the configuration is locked before production begins.

Frequently Asked Questions

Q: How do I verify the table can handle my specific corrugated flute type?
A: Submit a sample of your board — including flute profile and ply count — for a trial cut. The resulting sample cutting report documents edge quality, flute compression and achievable cutting depth with the recommended tool head, giving you a physical reference before purchase commitment.

Q: What voltage and plug configuration should I confirm before shipment?
A: The table supports 110V, 220V and 380V options. Confirm your factory supply voltage, phase and frequency, as well as the plug standard in your market, so the electrical schematic and wiring are finalized before the machine leaves the production floor.

Q: Can the software work with my existing box structure CAD files?
A: The included packaging design software imports PLT, DXF, AI and PDF formats directly. Before ordering, share a representative file from your current workflow so compatibility is verified and any nesting or layer-mapping requirements are resolved in advance.

Q: Which tool head do I need for cutting, creasing and kiss-cutting on the same sheet?
A: Cutting corrugated board uses the oscillating knife; fold lines require the creasing wheel; adhesive label outlines need the kiss-cutting tool. The 1625 table allows head changes within a single job file, so all three operations complete in one workflow without manual intervention.

Q: How does the vacuum table handle small packaging parts that tend to lift?
A: The aluminum bellows platform with the 9 kW pump provides full-surface hold-down across the 1600×2500 mm bed. For very small carton components, vacuum zoning concentrates suction under the part area, preventing lift during the final contour pass without mechanical clamps.